Mercusys ME70X - Инструкция по эксплуатации - Страница 4

English

2

LED Explanation 

(For Range Extender Mode)

Off

Power is off.

Blinking

The extender is starting or connecting to the 

host network.

Solid Red

The extender is not connected to the host 

network.

Solid Green

The extender is connected to the host network 

and works well.

Solid Orange The extender is connected to the host network, 

but is too far away from the router.

FAQ (Frequently Asked Questions)

Q1  How do I configure the extender using WPS?

 • Plug the extender into a power outlet near your router, and wait 

until the Signal LED is lit and solid red.

 • Press the 

WPS

 button on your router.

 • Within 2 minutes, press the 

WPS

 or 

RESET/WPS

 button on the  

extender. The LED should change from blinking to a solid state, 

indicating a successful WPS connection.

Q2  How do I reset the extender?

 • With the extender powered on,  press and hold the 

Reset

or 

RESET/WPS

 button until the Signal LED turns off, then 

release the button. When the Signal LED turns solid on, the 

reset process is complete.

Q3  What should  I do if I cannot access the extender’s web 

management page?

 • Make sure your wireless device is connected to the 

extended network using the extended SSID.

 • Verify that 

http://mwlogin.net

 is correctly entered in the web 

browser.

 • If you are using a computer, make sure it is set to obtain an 

IP address automatically.

 • Refer to 

Q2 

to reset the extender and try again.