VERTO Li-Ion 52G549 - Инструкция по эксплуатации - Страница 10

10

avoid contact with the substance. In case of accidental contact, flush 
the electrolyte abundantly with water. In case of contact with eyes, 
additionally seek medical attention. Leaked electrolyte may cause eye 
irritation or burns.

•

Do not disassemble the battery – there is a risk of short circuiting.

•

Do not use power tool battery in rain.

•

Always keep the battery away from sources of heat. Do not leave 
the battery for a long time in high temperature (in direct sunlight, in 
proximity of heaters and wherever the temperature exceeds 50°C).

SAFETY INSTRUCTIONS FOR BATTERY CHARGER

•

This equipment is not intended for use by persons with restricted 
physical, sensory or mental capabilities (including children) or persons 
who have no experience or are unfamiliar with the equipment, unless 
the use is supervised or carried out in accordance with equipment use 
instructions handed over by persons responsible for their safety. 

•

Pay attention to children so they don’t play with the equipment. 

• Do not expose the charger to humidity or water.

 Ingress of water 

into the charger increases risk of electric shock. Use the charger only 
in dry rooms.

•

Disconnect the charger from power supply before starting any 
maintenance or cleaning.

• Do not use charger when placed on flammable surface (e.g. paper, 

textiles) or in proximity of flammable substance.

 Greater charger 

temperature when charging increases risk of fire.

• Check condition of charger, cable and plug before each use. 

Do not use the charger if any damage is found. Do not try 
to disassemble the charger.

 All repairs should be made by an 

authorized service workshop. Improper charger assembly may cause 
electric shock or fire.

•

Children and persons who are physically, emotionally or mentally disabled 
and other persons, whose experience or knowledge is insufficient to use 
the charger while following all safety rules should not use the charger 
without supervision of person responsible for their safety. Otherwise there 
is a risk of improper use and injuries in consequence.

•

When the charger is not in use, it should be disconnected from the 
mains network.

CAUTION! The design is assumed to be safe, protection measures 
and additional safety systems are used, nevertheless there is always 
a small risk of injuries at work. 

Li-Ion batteries may leak, set on fire or explode when heated to high 
temperature or short-circuited. Do not store the batteries in a car 
in hot and sunny days. Do not open the battery. Li-Ion batteries 
contain electronic protection devices that, if damaged, may cause 
fire or explosion of the battery.

EXPLANATION OF USED SYMBOLS

1

2

4

6

3

5

7

8

9

10

11

12

13

14

15

16

17

18

360°

19

20

1. 

CAUTION! Use precaution measures.

2,3. 

Read instruction manual, observe warnings and safety 

conditions therein!

4. 

Use personal protection equipment (protective goggles, earmuff 
protectors).

5. 

Remove the battery from the device before starting any 
adjustments or cleaning related tasks.

6. 

Use protective gloves

7. 

Keep the tool away from children

8. 

Use protective clothes

9. 

The garden tool is designed for outdoors use 

10. 

Do not put your hands or legs close to cutting parts!

11. 

Keep safe distance from working garden tool

12. 

Protect the tool from moisture

13. 

When the device is operating do not put hands into its openings

14. 

Disconnect the charger before repairs

15. 

Protection class 2

16. 

The charger is designed to operate indoors in dry environment

17. 

Do not throw cells into fire

18. 

Maximum permissible cell temperature

19. 

Recycling

20. 

Do not allow other persons in the grass trimmer operation range

CONSTRUCTION AND USE

Cordless grass trimmer is a battery-powered tool. Drive consists of 
DC commutator motor with permanent magnets. Tool of this type is 
designed for tasks in home garden. The grass trimmer is designed for 
trimming grass in corners and edges of lawns and flowerbeds, wherever 
lawn mower cannot reach.

Use the power tool in accordance with the manufacturer’s 
instructions only.

DESCRIPTION OF DRAWING PAGES

Below enumeration refers to the device elements depicted on the 
drawing pages of this manual.

1. 

Switch lock button

2. 

Switch

3. 

Auxiliary handle

4. 

Locking buttons for auxiliary handle

5. 

Battery lock button

6. 

Battery

7. 

LED diodes

8. 

Locking ring for main handle 

9. 

Telescopic pipe

10. 

Locking ring for telescopic pipe

11. 

Guide with wheels

12. 

Head

13. 

Locking button for head tilt angle

14. 

Edge rod

15. 

Guard

16. 

Line lock button

17. 

Cutting line

18. 

Metal blade

19. 

Safety catches

20. 

Cover

21. 

Spool casing

22. 

Spool

* Differences may appear between the product and drawing

MEANING OF SYMBOLS

 CAUTION

 WARNING

ASSEMBLY / SETTINGS

 INFORMATION

EQUIPMENT AND ACCESSORIES

1.  Guard with screws 

- 1 set

2.  Edge rod 

- 1 pce

3.  Guide with wheels 

- 1 pce

4.  Battery  

- 2 pcs

**

5.  Charger  

- 1 pce

**

** Optional equipment is included only in devices 52G506, 52G549, 52G568, 52G585. 
Devices 52G506-0, 52G549-0, 52G568-0, 52G585-0 do not contain the abovementioned  
equipment.

All VES ( VERTO ENERGY SYSTEM) batteries and chargers are compatible 
with VERTO devices: 52G506, 52G506-0, 52G549, 52G549-0, 52G568, 
52G568-0, 52G585, 52G585-0.