EFCO DSH 400 T ES 61459011E1B - Инструкция по эксплуатации - Страница 12

6

GB

CAUTION - For the mixture, never use a 

fuel with an ethanol percentage higher than 
10%; gasohol (mixture of gasoline and 
ethanol) up to 10% ethanol or E10 fuel are 
acceptable.

NOTE

 - Prepare only the quantity of mixture 

required for immediate use; do not leave fuel in 
the tank or a container for a long time. Were 
commend the use of the additive 

Emak ADDITIX 

2000

  code 001000972 if the mixture is to be 

stored for 12 months.

Alkylate gasoline

CAUTIONS – Alkylate fuels have 

different density than normal fuel. Therefore 
engines, set with normal fuel, need different 
H jet regulation to avoid critical issues. For 
this operation it’s necessary turned at a 
Licensed Service Dealer.

Filling the tank

stir the mixture well before refuelling.

STARTING

Before starting the engine, make sure 

that the blade is free to move and is not in 
contact with any foreign objects.

The cutting attachment must not rotate 

when the engine is idling. Otherwise contact 
an Authorized Service Center to carry out a 
check and fix the problem.

WARNING: Hold the brush cutter firmly 

with both hands. Always keep your body is to 
the left of tube. Never use a cross-handed grip. 
Left-handers should follow these instructions 
too.
Keep a proper cutting stance.

Over exposure to vibrations can result in 

blood-vessel or nerve injury to persons 
suffering with blood circulation problems. Seek 
medical attention if you experience physical 
symptoms such numbness, lack of feeling, 
reduction in normal strength, changes in the 
colour of the skin. These symptoms normally 

from water heaters, electric motors or 
switches, furnaces, etc.

·

Never take the cap off the tank when the 
engine is running.

·

Never use fuel for cleaning operations.

·

Take care not to get fuel on your clothing

OIL

2%-50 : 1

1
5

10
15
20
25

GASOLINE

l

 0,02 

(20)

 0,10 

(100)

 0,20 

(200)

 0,30 

(300)

 0,40 

(400)

 0,50 

(500)

 l

A

(cm

3

)

This product is powered by a 2-cycle engine and 
requires pre-mixing gasoline and 2-cycle oil. 

Pre-mix unleaded gasoline and 2-cycle engine 
oil in a clean container approved for gasoline.

RECOMMENDED FUEL:

 THIS ENGINE IS 

CERTIFIED TO OPERATE ON UNLEADED 
GASOLINE INTENDED FOR AUTOMOTIVE USE 
WITH AN OCTANE RATING OF 89 ([R + M] / 2) OR 
HIGHER.
Mix 2-cycle engine oil with gasoline according to 
the instructions on the package.
We strongly recommend the use of 

2% (1:50)

Efco - Oleo-Mac two cycle engine oil, which is 
specifically formulated for all air-cooled two-
stroke engines.
The correct oil / fuel proportions shown in the 
table (Fig. A) are suitable when using the 

PROSINT 2

 and 

EUROSINT 2

 or an equivalent 

high-quality engine oil 

(JASO specification FD 

or ISO specification L-EGD)

.

CAUTION: DO NOT USE AUTOMOTIVE 

OIL OR 2-CYCLE OUTBOARD OIL.

CAUTION:

- Match your fuel purchases to your 

consumption; don’t buy more than you will 
use in one or two  months;

-  Store gasoline in a tightly-closed container 

in a cool, dry place.