Bosch EasyGrassCut 18V-26 06008C1C04 - Инструкция по эксплуатации - Страница 27

English | 

27

Dismounting the spool, winding up the cutting
line and mounting the spool (see figures J to L)

u

Remove the battery before replacing the spool.

Press both latches of the spool cover together and remove
the spool cover 

(11)

. Afterwards, remove the empty spool

(12)

.

Cut off approx. 4.0 m line from the refill roll. Slide one end of
the cutting line into the hole for line wind-up 

(13)

 in the

spool and wind up the cutting line uniformly and tightly.
Slide the other end of the cutting line through the hole for
line guiding 

(14)

 in the trimmer head and mount the spool

back into the trimmer head. Affix the spool by mounting the
spool cover 

(11)

.

Line Feeding (see figure M)

Semi-automatic Line Feeding

The trimmer is equipped with a semi-automatic feeding sys-
tem. The system feeds 10 mm of the line with every press of
the on/off switch 

(4)

.

Manual Line Feeding

Press the line-feed button 

(15)

, and pull the cutting line out

to the desired length.

Troubleshooting

d.c.

Lawn Trimmer/Lawn Edge Trimmer

Problem

Possible Cause

Corrective Action

Motor refuses to start

Battery discharged

Recharge battery

Battery too hot/cold

Allow to cool/warm

Garden tool functions
intermittently

On/Off switch defective

Contact Bosch customer service agent

Internal wiring of garden tool defective

Contact Bosch customer service agent

Garden product la-
bours

Grass too high

Cut in stages

Garden tool does not
cut

Cutting line too short/broken off

Manually feed cutting line

Spool empty

Replace line spool

Cutting line can no
longer be fed

Line inside the spool entangled

Inspect the spool, rewind if necessary

Spool empty

Refill line spool

Cutting line retracts
into spool

Cutting line too short/broken off

Remove spool – rethread line (see figures 

J

 − 

L

)

Cutting line breaks fre-
quently

Line inside the spool entangled

Remove spool – rewind line (see figures 

J

 − 

L

)

Trimmer used incorrectly

Only trim with the tip of the line, avoid stones,
walls and other hard objects. Feed the line regu-
larly to maintain full cutting diameter.

Heavy vibrations

Cutting line broken

Cutting system damaged

Grass between spool housing and line-feed but-
ton

Grass in hole for line feed

Pull out cutting line with manual feed (see figure

M

)

Contact Bosch customer service agent

Disassemble spool cover and remove grass

Remove grass from hole for line feed

Battery and charger

Problem

Possible Cause

Corrective Action

Flashing red battery
charge indicator

No charging procedure
possible

Battery not (properly) inserted

Properly insert battery in charger

Battery contacts contaminated

Clean the battery contacts (e. g. by inserting and
removing the battery several times) or replace
the battery

Battery defective

Replace the battery

Bosch Power Tools

F 016 L94 299 | (22.07.2021)