Триммеры Al-ko BC 1000 E 112923 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
17
GB
440 102 _a
Cleaning
Clean the machine carefully after each use in
order to keep it functioning correctly.
Regularly clean all moving parts.
Clean the housing with a soft brush or a dry cloth.
Do not clean the machine with running water or high-
pressure washers.
Do not use solvents (petrol, alcohol, etc.) for the plastic
parts, since these can damage the plastic parts.
Keep the handle grips free from oil and grease. Water,
solvents and polishes are not allowed to be used.
Storage
Clean the machine and its accessories after each use.
Hang up the electric brushcutter by its handle.
This avoids placing unnecessary load on the
cutter head.
Store the machine in a dry place protected against
frost.
Disposal
Do not dispose of worn-out
machines in domestic waste!
The packaging, machine and accessories are made
from recyclable materials and must be disposed of
accordingly.
Technical data
Article no. 112 923
Technical data acc. to the following standards:
Mechanical safety acc. to EN 786, 5.1.1, Annex
E and D, sound pressure and sound energy level acc. to
DIN EN ISO 3744:2010,
measurement of mechanical vibration at the hand grip
acc. to EN 28662-1:1992.
The specified values have been established based
on a standardised test process and can be used
for comparing different electrical tools with one
another.
In addition, these values are suitable for estimating
in advance the loads to which the user is exposed
due to vibration.
Important!
The actual vibration values may differ from those
specified, depending on what the electrical tool is
used for.
Take measures to protect yourself against vibration
loads. In doing so, take account of the entire
working process, i.e. also times during which
the electrical tool is operating without load, or is
switched off.
Suitable measures include regular maintenance
and care of the electrical tool and the tool
attachments, keeping your hands warm, taking
regular breaks and planning the working
sequences effectively.
1000W
230 V AC / 50 Hz
4.3
m/s² (K = 1.5 m/s²)
LpA 8
0.1
dB(A) K = 3 dB(A)
96 dB(A)
Guaranteed: 96 dB(A) Measured: 94 dB(A)
35 cm
4.7
kg
