PHILIPS HD2650/90 - Инструкция по эксплуатации - Страница 5

guarantee leaflet). If there is no Consumer Care 
Centre in your country, go to your local Philips 
dealer.

Before first use

Put the toaster in a properly ventilated room 
and select the highest browning setting. Let 
the toaster complete a few toasting cycles 
without bread in it. This burns off any dust 
and prevents unpleasant smells.

Toast, reheat, or defrost bread (fig.2)
Note:

• 

Do not operate the appliance without 
the crumb tray.

• 

Never force bread into toasting slots. 
Never toast bread slices that have been 
buttered. Take extra care when toasting 
breads that contain sugar, preserves, 
raisins or fruit bits, due to risk of 
overheating. Do not use bent, damaged 
or broken bread slices in your toaster as 
it may get jammed into the slot or stuck 
in the toasting chamber.

To toast bread, follow the steps 1, 2, 3, 4.

• 

Select a low setting (1-2) for lightly 
toasted bread.

• 

Select a high setting (6-8) for darkly 
toasted bread.

To reheat bread, press the reheating setting 
button (   ).
To defrost bread, press the defrosting setting 
button (   ).

Note:

• 

You can stop the toasting process 
and pop up the bread at any time by 
pressing the stop button (

STOP

) on the 

toaster.

Tip:

• 

You may use different browning settings 
when toasting different types of bread:

• 

For dry, thin or stale bread, select a 
lower setting. This type of bread has 
less moisture and it will go brown 
quicker than moist, thick or fresh 
bread.

• 

For fruit bread like raisin bread, 
select a lower setting.

• 

For higher sugar content bread, 
select a lower setting.

English

9

EN

• 

For heavier textured bread like rye 
bread or whole wheat bread, select 
a higher setting.

• 

When you toast one slice of bread, 
browning of toast may be slightly varied 
from one side to the other.

• 

For bread that may have loose food 
bits, for example raisin bread and whole 
wheat bread, remove the loose bits 
before putting bread slices into the slot. 
This can avoid potential flame/smoke 
resulting from loose food bits dropping/
sticking in the toaster chamber.

Bun warming (fig.3)

To warm buns, follow the steps below:

a

  Push down the warming rack lever to 

unfold the warming rack.

b

Turn the browning control to the bun 
warming setting (   ).

Note:

• 

Do not place bread on bun warming 
rack to avoid damage to toaster.

• 

Never put the rolls to be warmed up 
directly on top of the toaster. Always use 
the warming rack to avoid damage to 
the toaster.

Cleaning (fig.4)
Warning:

• 

Never use scouring pads, abrasive 
cleaning agents or aggressive liquids to 
clean the appliance.

• 

Lightly tap the toaster housing to 
dislodge any bread crumbs in the 
toaster chamber.

• 

Allow toaster to cool down for 30 
minutes after use before cleaning the 
toaster.