Centek CT-1429 - Инструкция по эксплуатации - Страница 17

17

10. Regularly check the appliance and its power cable for damage.

 Operating a damaged appliance is not allowed. Do not attempt to repair 

the appliance yourselves, apply to certified technicians. 

11. Only the use of original spare parts is allowed. Do not use accessories 

which are not included in the scope of supply.

12. Ensure that the power supply grid voltage corresponds to the one 

indicated on the appliance before operating it.

13. Before turning the appliance on ensure that it is fully and correctly 

assembled.

14. Do not pull the power cable if it touches sharp edges, is jammed by any

objects or entangled; avoid contact of the power cable with hot surfaces.

15. In case of damage to the power cable or any other part of the appliance 

immediately disconnect the appliance from power supply and apply to the 

Manufacturer’s service centre. In case of unskilled intervention into the 

appliance or non-observance of the operating requirements listed in the 

present manual the warranty becomes void.

16. Connect the appliance only to power grid sockets equipped with

earthing contacts, use only two-pole extension cables with 10A rating and 

an earthing conductor.

17. Do not use multiple high-power appliances simultaneously – this may 

lead to malfunctions in residential power supply systems.

18. Do not use the appliance if: 

• the power cord is damaged;

• the appliance has visible damage; 

• the appliance has been dropped from height; 

• the appliance has been exposed to moisture.

19. Ensure the appliance is turned off when not in use!

20. Do not operate the appliance at temperatures below 0 °С and above 

35 °С. If the appliance has been exposed to temperatures below 0 °С for 

a prolonged time, place it in a heated environment for at least 3 hours 

before turning it on. 

21. Pull the plug from the power socket if: the appliance does not work 

correctly (unusual noise, vibration, etc.); before disassembly/reassembly; 

after each use. Disconnect the appliance from power supply if You have to 

leave it unattended for even a short time.

22. Do not place toasts containing excessive quantities of sugar, jam and 

other ingredients in the toaster.

23. Special instructions for transportation (shipment) and sale: none.

24. Use the appliance only with the proper connector.

25. The appliance is not designed to be powered from an external timer or 

other separate remote control system.

26. The toasts may catch fire, therefore do not use the toaster near or 

underneath curtains or other combustible materials!

AT TENTION!

-

Electric shock hazard! Never submerge the appliance in water!

-

Fire hazard! Avoid all contact of the appliance with flammable liquids 

and combustible materials!

-

The outer surface of the appliance stays hot after operation.

-

Careful: accessible surfaces of the appliance can reach high temperature 

during operation. Do not touch the hot surfaces.

2. APPLIANCE DESCRIPTION 

1. Toaster Body

2. Slots for Toasts

3. Start Lever

4. DEFROST Button

5. WARM UP Button

6. STOP button

7. Power Regulator

3. SCOPE OF SUPPLY

-

Toaster - 1 pc.

-

Instruction manual - 1 pc.

4. OPERATION

PREPARATION

-

 Ensure that the power supply grid voltage corresponds to the one 

indicated on the appliance before operating it. 

-

Remove all packaging materials from the appliance.

OPERATING PROCEDURE

-

 Insert the plug of the power cable into the poser socket. 

-

 Insert the prepared slices of bread into the toast slots. 

-

 Select the desired toasting intensity with the power regulator.

NOTE: 

the toasting power depends on the thickness, type and quality of the

bread and should be selected by way of trial.

-

Depress the start lever until it is retained.