Omron R1 (HEM-6114-RU) - Инструкция по эксплуатации

E

I

K

F

J

H

G

B

C

D

1

2

A

Wrist Blood 

Pressure Monitor

Model 

R1

Instruction Manual

Thank you for purchasing the OMRON R1 Wrist Blood Pressure Monitor.

This remarkable, compact and easy to use instrument is ideal for people who 
frequently monitor their own blood pressure. The small, pre-formed wrist cuff is 
very convenient and easy to apply.

The OMRON R1 is a compact and easy to use blood pressure monitor,
operating on the oscillometric principle. It measures your blood pressure and
pulse rate simply and quickly. For comfortable controlled inflation without the
need of pressure pre-setting or re-inflation the devices uses its advanced
“IntelliSense” technology.

The unit also stores the last measurement value in memory.

Intended Use

This product is designed to measure the blood pressure and pulse rate of 
people within the range of the designated wrist cuff, following the instructions in 
this instruction manual.
It is mainly designed for general household use. Please read the Important 
Safety Information in this instruction manual before using the unit.

Please read this instruction manual thoroughly before using the unit. For 
specific information about your own blood pressure, CONSULT YOUR 
DOCTOR.

Consult your doctor prior to using in pregnancy or if diagnosed with arrhythmia 
or arteriosclerosis.
Please read this section carefully before using the unit.

Warning:  

• Indicates a potentially hazardous situation which, if not avoided, could result 

in death or serious injury.

(General Usage)

• Always consult your doctor. Self-diagnosis of measurement results and 

self-treatment are dangerous.

• People with severe blood flow problems, or blood disorders, should consult a 

doctor before using the unit, as cuff inflation can cause internal bleeding.

(Battery Usage)

• If battery fluid should get in your eyes, immediately rinse with plenty of clean 

water. Consult a doctor immediately.

Caution: 

• Indicates a potentially hazardous situation which, if not avoided, may result in minor or 

moderate injury to the user or patient or damage to the equipment or other property.

(General Usage)

• Do not leave the unit unattended with infants or persons who cannot express their consent.
• Do not use the unit for any purpose other than measuring blood pressure.
• Do not disassemble the unit or wrist cuff.
• Do not inflate the wrist cuff over 299 mmHg.
• Do not use a mobile phone or other devices that emit electromagnetic fields, 

near the unit. This may result in incorrect operation of the unit.

• Do not operate unit in a moving vehicle (car, airplane).

(Battery Usage)

• If battery fluid should get on your skin or clothing, immediately rinse with 

plenty of clean water.

• Use only two “AAA” alkaline batteries with this unit. Do not use other types of batteries.
• Do not insert the batteries with their polarities incorrectly aligned.
• Replace old batteries with new ones immediately. Replace both batteries at 

the same time.

• Remove the batteries if the unit will not be used for three months or more.
• Do not use new and used batteries together.

General Precautions

• Do not apply strong shocks and vibrations to or drop the unit.
• Do not take measurements after bathing, drinking alcohol, smoking, 

exercising or eating.

• Do not inflate the wrist cuff when it is not wrapped around your wrist.
• Do not wash the wrist cuff or immerse it in water.
• Read and follow the “Important information regarding Electro Magnetic 

Compatibility (EMC)” in the Technical Data Section.

• Read and follow the “Correct Disposal of This Product” in the Technical Data 

Section when disposing of the device and any used accessories or optional parts.

Important Safety Information

Note: Subject to technical modification without prior notice.
• This OMRON product is produced under the strict quality system of OMRON 
  HEALTHCARE Co. Ltd., Japan. The Core component for OMRON blood 
  pressure monitors, which is the Pressure Sensor, is produced in Japan.
• Disposal of this product and used batteries should be carried out in accordance 
  with the national regulations for the disposal of electronic products.

This device fulfils the provisions of EC directive 93/42/EEC (Medical Device 
Directive).
This blood pressure monitor is designed according to the European Standard 
EN1060, Non-invasive sphygmomanometers Part 1: General Requirements 
and Part 3: Supplementary requirements for electromechanical blood pressure 
measuring systems.

Important information regarding Electro Magnetic Compatibility (EMC)

With the increased number of electronic devices such as PC’s and mobile 
(cellular) telephones, medical devices in use may be susceptible to 
electromagnetic interference from other devices. Electromagnetic 
interference may result in incorrect operation of the medical device and 
create a potentially unsafe situation.
Medical devices should also not interfere with other devices.

In order to regulate the requirements for EMC (Electro Magnetic 
Compatibility) with the aim to prevent unsafe product situations, the 
EN60601-1-2:2007 standard has been implemented. This standard defines 
the levels of immunity to electromagnetic interferences as well as maximum 
levels of electromagnetic emissions for medical devices.

This medical device manufactured by OMRON HEALTHCARE conforms to 
this EN60601-1-2:2007 standard for both immunity and emissions.
Nevertheless, special precautions need to be observed:
• Do not use mobile (cellular) telephones and other devices, which generate 

strong electrical or electromagnetic fields, near the medical device. This 
may result in incorrect operation of the unit and create a potentially unsafe 
situation. Recommendation is to keep a minimum distance of 7 m. Verify 
correct operation of the device in case the distance is shorter.

Further documentation in accordance with EN60601-1-2:2007 is available at 
OMRON HEALTHCARE EUROPE at the address mentioned in this instruction 
manual.
Documentation is also available at www.omron-healthcare.com.

This marking shown on the product or its literature, indicates 
that it should not be disposed of, with other household wastes 
at the end of its working life. To prevent possible harm to the 
environment or human health from uncontrolled waste 
disposal, please separate this from other types of wastes and 
recycle it responsibly to promote the sustainable reuse of 
material resources.

Household users should contact either the retailer where they purchased 
this product, or their local government office, for details of where and how 
they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and 
conditions of the purchase contract. This product should not be mixed with 
other commercial wastes for disposal. 

This product does not contain any hazardous substances.

Correct Disposal of This Product 
(Waste Electrical & Electronic Equipment)

Made in China

Manufacturer

OMRON HEALTHCARE Co., Ltd.

53, Kunotsubo, Terado-cho, Muko, Kyoto,
617-0002 JAPAN

OMRON HEALTHCARE EUROPE B.V.

Scorpius 33, 2132 LR Hoofddorp
THE NETHERLANDS
www.omron-healthcare.com

ComplectService Ltd.

13-14 building, 26 B. Tishinskiy per. 
Moscow 123557, RUSSIA
www.csmedica.ru

OMRON (DALIAN) CO., LTD.

Dalian, CHINA

EU-representative

Production Facility

Exclusive
distributor in
Russia & importer

= Type B

Introduction

1.   Overview

Main unit: 

A. Display
B. Battery compartment cover

C. Wrist cuff
D. O/I START button

Display: 

E

. 

Systolic blood pressure

F

. 

Diastolic blood pressure

G

. 

Memory symbol

 (Displayed 

when 

viewing

last value stored in memory)

H

.  Battery low symbol

I

. 

Heartbeat symbol
(Flashes during measurement)

J

. 

Pulse

K

. 

Deflation symbol

2.1   Installing/Replacing the Batteries

2.   Preparation

1.

2.

3.

Put the battery cover back in place.

Note:  The measurement values continue to be stored in memory even 
 

after the batteries are replaced.

2.2   Battery Life & Replacement

- When the battery low symbol (     ) starts to blink, you will still be able to use 
  the unit for a short while. You should replace the batteries with new ones 
  as soon as possible.
- When the symbol (     ) remains lit, the batteries are exhausted. You should 
  replace the batteries with new ones at once.

If the battery low symbol (     ) appears on the display, 
replace both batteries at the same time.

Remove the battery compartment cover 
by pulling it off in the direction of the 
arrow.
1) Push the hook on the bottom of the 

battery cover.

2) Pull the cover off the main unit.

Insert two identical 1.5V “AAA” 
alkaline (LR03) batteries in the 
battery compartment.
Make sure their polarity (+/-) is 
aligned with the polarity (+/-) as 
indicated in the battery compartment.

•  Turn the unit off before replacing the batteries.
•  Remove the batteries if the unit will not be used for three months or more.
•  Dispose of batteries according to applicable local regulations.
•  Two new identical 1.5V “AAA” alkaline batteries will last for approximately 

300 measurements, when used to take two measurements a day.

•  Since the supplied batteries are for monitoring use only, they may have a 

shorter life and do not last for 300 measurements.

3.   Using the Unit

4.   Handling Errors and Problems

You can take a measurement on either your left or right wrist.

Measurements can also be made on 
the right wrist.
Fit the unit on the right wrist as shown.

Product Description
Model
Display
Measurement
Measurement Range

Memory
Accuracy 

Inflation
Deflation
Power Source
Battery Life

Operating Temperature/
Humidity

Storage Temperature/
Humidity
Weight of Main Unit
Outer Dimensions

Measurable
circumference of wrist
Cuff material
Package Content

Taking a reading on the right wrist

1.

2.

Hold the bottom part of the wrist 
cuff and wrap it around the wrist 
while pulling so that it fits 
comfortably.

1.

Press the O/I START button to start measurement.
The wrist cuff will start to inflate automatically after the 
power is turned on.

2.

After the unit has detected your blood pressure and 
pulse rate, the cuff automatically deflates and your blood 
pressure and pulse rate are displayed.

3.

4.

Undo the cuff and remove the unit.

5.

3.1   Applying the Wrist Cuff

This unit automatically stores the last measurement value.

1.

3.3   Taking a Reading

6.   Technical Data

Correct posture during measurement helps you get accurate results.
You should also try to measure your blood pressure at the same time each day.

3.2   Correct Posture

Sit comfortably with your 
back straight, hold your arm 
across your chest and relax.

To Delete the Value Stored in Memory

Relax your wrist and hand.

4.1   Error Messages

Error Symbol

Cuff over inflated.

Repeat measurement.
Remain still and do not move 
during measurement. 
(Refer to “3.3 Taking a 
Reading”.)

Movement during 
measurement.

The wrist cuff 
is not fastened 
securely.

Carefully read and repeat 
the steps listed under 
“3.1 Applying the Wrist Cuff”.

An Er mark with 
a code/number 
indicates the 
device has a 
hardware failure.

Consult your OMRON retail 
outlet or distributor.

The battery 
power is low.

Replace the batteries with two 
new “AAA” alkaline (LR03) 
batteries.

Blinks or appears 
continuously

Wrist cuff pressure 
does not rise.

Air is leaking from 
the wrist cuff.

Consult your OMRON 
retail outlet or distributor.

The wrist cuff is loose.

Apply the cuff correctly 
so that it is securely 
wrapped around the wrist. 
(Refer to “3.1 Applying 
the Wrist Cuff”.)

The blood pressure is different each time.
The reading is extremely low (or high).

The unit loses power 
during measurement.

Replace the batteries 
with new ones. 

Nothing happens 
when you press 
the buttons.

Replace the batteries 
with new ones.

The batteries have 
been inserted 
incorrectly.

Insert the batteries 
with the correct (+/-) 
polarity.

4.2   Troubleshooting

Symptom

The reading is
extremely low (or 
high). 

Are you holding 
the wrist cuff at 
heart level?

Measure while in 
the correct posture. 
(Refer to “3.2 Correct 
Posture”.)

Is the cuff 
wrapped snugly 
around the wrist?

Wrap the cuff correctly. 
(Refer to “3.1 Applying 
the Wrist Cuff”.)

Are your arms and 
shoulders tense?

Relax and try taking 
the measurement again. 
(Refer to “3.3 Taking 
a Reading”.)

Other problems.

3.4   Using the Memory Function

Calibration and Service

5.   Maintenance and Storage

To protect your unit from damage, please avoid the following:

Movement or 
talking during 
measurement.

Remain still and do not 
talk during measurement. 
(Refer to “3.3 Taking 
a Reading”.)

Wrist cuff deflates 
too soon.

Cause

Correction

Cause

Correction

Notes:
•  Do not take measurement after bathing, drinking alcohol, or exercising.
•  Do not move or talk during measurement.

Note:  Make sure that the wrist cuff does not cover the protruding part of 
 

the wrist bone (ulna) on the outside of the wrist.

Press and hold the O/I START button until the last
measurement value is displayed along with the memory 
symbol.

Do not use your other 
hand to support the wrist cuff. 
This can result in inaccurate 
measurement results.

Do not bend 
your wrist back.

Do not clench 
your fist.

Do not bend 
your wrist forward.

Position your arm so that 
the unit is at the same 
level as your heart.

Notes:

•  You can take a measurement on either your left or right arm.
  The blood pressure can differ between the right arm and the left arm 

and therefore also the measured blood pressure values can be 
different. Omron recommends to always use the same arm for 
measurement. If the values between the two arms differ 
substantially, please check with your physician which arm to use for 
your measurement.

•  To ensure correct measurement, apply the wrist cuff so that it fits 

comfortably around your wrist.

•  Do not apply over clothing.

Notes:
•  Unless the wrist cuff is wrapped securely 

around the wrist, it will not be possible to take 
correct measurements.

•  If you have a slender wrist, the cuff may feel 

slightly loose.

  However, this will not affect measurement 

results and you should not force the cuff to fit.

•  The remaining part of the wrist cuff can be 

conveniently folded back out of the way.

•  If the remaining part of the cuff is difficult  to 

fold back, measurement results will not be 
effected.

Notes:
•  Sit still and do not talk or move until the measurement is completed.
•  Keep the unit at heart height until the measurement is completed.
•  To stop measurement, press the O/I START button at any time during 

measurement.

To View Previous Readings Stored in Memory

Systolic blood pressure

Diastolic blood pressure

Pulse

To delete stored reading, first press and hold the O/I 
START button until the measurement value is displayed. 
Then keep the button pressed down for about 10 seconds. 
The last reading will then be deleted.

Note:  After the reading has been deleted, the screen to the right of the 

illustration above appears. Release the buttons to return to the 
memory display.

Blood pressure readings 
constantly vary with time 
of day and how relaxed 
you are. Take several 
deep breaths and try to 
remain relaxed before 
taking a measurement.

The batteries are 
drained.

The batteries are 
drained.

• Press the O/I START button and repeat 

measurement.

• If the problem continues, try replacing the 

batteries with new ones.

If this still does not solve the problem, contact 
your OMRON retail outlet or distributor.

•  Subjecting your unit to extreme temperatures, humidity, 

or direct sunlight.

•  Washing the cuff or exposing the cuff or unit to water.
•  Disassembling the unit.
•  Subjecting the unit to strong shocks or vibrations. 

Dropping the unit.

•  Cleaning the unit with volatile liquids. 

•  The accuracy of this blood pressure monitor has been 

carefully tested and is designed for a long service life.

•  It is generally recommended to have the unit inspected 

every two years to ensure correct functioning and 
accuracy. Please consult your authorised OMRON 
dealer or the OMRON Customer Service at the address 
given on the packaging or attached literature.

•  If the wrist cuff needs to be replaced have this done by 

an authorised expert. Consult your authorised OMRON 
dealer or the OMRON Customer Service.

•  Do not carry out any repairs by yourself. If a defect 

occurs or you have doubts about the correct functioning 
of the device, consult your authorised OMRON dealer 
or the OMRON Customer Service.

• The unit should be cleaned with a soft, dry cloth.
• Use a soft, moistened cloth and soap to clean the cuff.
• Keep the unit in its storage case when not in use.
• Fold the cuff into the storage case.
Do not store the unit in the following situations:
•  If the unit is wet.
•  Locations exposed to extreme temperatures, humidity, 

direct sunlight, dust or corrosive vapours.

•  Locations exposed to vibrations, shocks or where it will 

be at risk of falling.

Wrist Blood Pressure Monitor
OMRON R1 (HEM-6114-RU)
LCD Digital Display
Oscillometric method
Pressure: 0 mmHg to 299 mmHg
Pulse: 40 to 180 beats/min
Last measurement
Pressure: within ±3 mmHg
Pulse rate: within ±5% of reading
Automatic inflation by pump
Automatic rapid deflation
Two 1.5V “AAA” alkaline (LR03) batteries
Approximately 300 measurements when used twice 
daily with alkaline batteries at a room temperature of 
23°C
10°C to 40°C, 30 to 85% RH

-20°C to 60°C, 10 to 95% RH

Approximately 117 g (not including batteries)
71 mm (w) × 41 mm (h) × 70 mm (d) (not including 
the wrist cuff)
Approximately 13.5 to 21.5 cm

Nylon
Main unit, storage case, two “AAA” alkaline (LR03) 
batteries, instruction manual, guarantee card, blood 
pressure pass

Check the measurement result.
The unit automatically stores blood 
pressure and pulse rate into its 
memory.
Refer to “3.4 Using the Memory 
Function”.

2.

Press the O/I START button to turn 
the unit off.

Note:  If you forget to turn the unit off, it will 

automatically shut itself off after two 
minutes.

Press the O/I START button to turn off the unit.
If you forget to turn off the unit, it will shut itself off 
automatically after two minutes.

ulna

Please read the instruction manual carefully before 
using the device.

IM-HEM-6114-RU-05-10/2011

                      5329529-5C

Place the wrist cuff over your left wrist with your left thumb 
facing upward.

12K2607