Тонометры Medisana HGV - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
15
GB
3 Getting Started / 4 Operation
The device speaks the language setting, and changes the display and the an-
nouncement to the next language if the
MEM
button
is held down. The
selected language can be changed by releasing the
MEM
button
as soon
as the language that you require is displayed or spoken. The selected volume,
which is indicated by flashing bars, can be modified by pressing the
MEM
button
again and holding it down until the required volume is indicated –
the higher the bar, the louder the volume. The bar stops flashing and the
display switches back to the time display.
Attach the clean cuff to the left wrist which is
free from clothing with the palm of the hand
facing upwards.
There should be a gap of approx. 1 cm between
the cuff and the palm of the hand.
Press the Velcro tape firmly around the wrist
ensuring that it is not so tight that it could falsify
the measured result.
• Carry out the measurement whilst
seated.
• Relax your arm and place it comfortably,
on a table for instance.
• Lift the wrist so that the pressure
cuff is at heart height.
• Keep still during the measurement:
do not move and do not talk as
this may alter the measurements.
4.1
Fitting the cuff
4.2
Correct position
for taking
readings
ca. 1 cm
✗
✓
✗
