Термопоты Saturn ST-EK8038 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
5
FILLING & REFILLING
1. Open the Top Cover as the above
Instruction. Using another container, fill
water into the Inner pot until the FULL
mark is reached. Do not over fill as hot
water may splash out during boiling.
2. Close top cover, ensure lid is secured
by pressing firmly down till “click” sound
is heard.
BOIL WATER
1. After power is connected, water will
start to boil immediately.
Do not open top cover when water is
boiling.
Do not fill hot water when boiling.
Be caution of steam emitting from
steam vent.
KEEP WARM
1. The Keep Warm function will activate
and the indicator light (green) will turn
ON.
2. Press the “REBOIL” button if cold
water had been added or if you want to
reboil water in the pot up to 100 degree
again.
Setting
the
KEEP
WARM
Temperature
Press the “TEMP SELECTOR” button to
choose what temperature you like and
you can change this setting at any time.
You may select from four temperature
settings 98
0
С, 85
0
С, 60
0
С, cool down,
the KEEP WARM indicator light will be lit
during this phase.
TEMPERATURE SETTING CHART
98
0
C
Suitable for instant food
cooking, hot beverage such
as coffee or tea. (always set
back to 85
℃
after usage.)
85
0
C
Most suitable for tea serving
and to save electricity
60
0
C
Suitable for instant milk
formulas
and
taking
medication and to save
electricity.
Cool
down
Suitable for cool water save
electricity.
THREE WAY WATER OUTLET
1. AIR PUMP
Put the cup near water outlet,
Press< pump lid>. (No need power)
2. AUTO DISPENSE
a) Press the “UNLOCK” button once. The
“UNLOCK” LED will lit
b) Press the “AUTO DISPENSE” button
to dispense water.
3. CUP SWITCH
a) Press the “UNLOCK” button once. The
“UNLOCK” LED will lit.
b) Use the cup mouth to touch <cup
switch>water outlet at once.
As an added safety feature, the Air pot
will be automatically locked after 10
seconds if the “dispense water”
dispensing function is not used.
The dispensing function will be NOT
operated if power cord is pulled out.
CAUTION:
Always keep the lid away from you as
there is hot steam trapped under the
lid.
Do not press the dispensing button
when the inner water reservoir is
empty.
(Doing so can cause damage.)
You cannot dispense hot water by Auto
Dispense button or the Cup Switch if the
pot is unplugged.
RE-BOIL FUNCTION
1. Press “RE-BOIL” button once. Re-
boing indicator light will lit
2. After RE-BOIL is completed, the KEEP
WARM indicator light will lit
Re-boil will not function if there is
insufficient water inside.
Press
the
RE-BOIL
button
immediately after the water had just
reached boiling level will have no
effect as the water is already at
100
℃
.
AUTO CUT-OFF
1. When the water boil dry, the electric
air pot will automatically switch itself
off.
2. The auto CUT-OFF function will also
operate when:
The power is switched ON, but water
had not been filled.
Water level is below the MIN water
level indicator.
CLEANING
Switch OFF the main switch, unplug the
cord from the appliance and allow unit
to cool temperature. Pour out the
remaining water.
