Термопоты Saturn ST-EK8035 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
2. Remove all packing materials, including various stickers.
3. Clean the frame and base of the kettle with wet cloth, then let it dry.
Before the first use fill and boil the water. Than pour off the water and
repeat this action two times.
II. OPERATION OF THE KETTLE
1.
Establish the device on an equal surface
and insert a plug into the socket At
installation watch that hot steam at thermo
pot boiling did not get on furniture, home
appliances, walls etc.
2.
Opening, removal and cover installation.
1. Lift the handle of opening of a cover.
2. Open a cover upwards. Keep the handle
of opening of a cover in the top position,
press the button of removal of a cover and
uncover at an angle upwards. For cover
installation into place execute actions for
cover removal in return sequence. For
cover closing press it from above before
click.
7
3.
First boiling.
Pour water in a thermo pot to a mark
"FULL" and close a cover.
Attention:
In order to avoid a device
overheat it is not recommended to pour less
than 0.5 I of water and above mark FULL.
In avoidance boil regularly add water.
4.
Connect a food cord in the socket. The
thermo pot will join automatically; the
boiling indicator red colour thus will light
up.
5.
After water has begun to boil also a teapot
has passed in a "Keep warm" mode and the
indicator of green colour has lighted up,
press button "PRESS" and merge in such a
way half of water.
6.
Then disconnect a power supplies, having
taken out a plug from the socket, disconnect
a cord, uncover and merge the remained
water as is shown in drawing.
