Telefunken TF-LED32S34 - Инструкция по эксплуатации - Страница 4

Before you start

4

4

Before you start

product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown.

• Do not install it at the place on the strong

magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf

with wheels when installing this product. If it 
moves or is tipped over, it may be damaged.

• Do not place any fire source such as

candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire.

• Do not place the unit into closed space

of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at least 10 cm 
at above, left, and right of the TV.

• Please place all the signal cords behind of

rear panel.

• Do not overexert or touch the panel when

you convey the product. Do not transfer the 
LED TV up or down display direction.

• Do not transport it with the power cord

or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, damaged power 
cord, connection cable or connection terminal 
may cause fire, electric shock or breakdown.

• 2 persons or more shall transport the

device, which is heavier than 18 kg. If you drop 
or tip over the device, it may damage it.

• The temperature of the product’s body

becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.

All images provided herein are schematic 
drawings of real objects and may differ 
from their real images.

Wall or ceiling mounting implements 

must be durable and sufficient enough to 
support the weight of the unit.

Installation

Stand installation

Insert the stand supporting element to 

supporting hole on the back panel of the 
unit body, align the supporting element and 
supporting hole centre

 Fasten the screw.

Wall mounting

For wall mounting the back panel of this 

unit is equipped with 4 screw holes (100 
mm horizontal spread distance x 100 mm 
vertical spread distance). A VESA wall-mount 
bracket should be used for wall mounting (the 
bracket is not included and should be acquired 
separately). Manufacturer is not responsible 
for improper mounting resulting in damage of 
the unit.