Telefunken TF-LED22S15 - Инструкция по эксплуатации - Страница 11

Operation

11

11

Operation

•  

Language

: select the language of the 

OSD menu.

•  

Transparency

: adjust the menu screen 

transparency.

•  

Blue screen

: set on or off blue screen 

activation when no signal.

•  

Panel lock

: select ON to lock all buttons 

on the panel. Set OFF to unlock the buttons or 
press and hold any panel button for 5 seconds.

•  

Health Remind: 

Switch the Health 

Remind on or off. While Health Remind is set 
to On, a prompt picture will remind you to have 
a break at intervals of two hours.

•  

Reset

: reset the parameters to initial 

factory settings.

USB operation

Background information

•  This unit supports playback of video files 

with 3GP, ASF, AVI, MKV, MPG, DAT, M2TS, 
MP4, TS, VOB extension, with video codecs 
WMV V9, DIVX, H263, MPEG-4, MPEGII, XVID 
and audio codecs PCM, WAV, WMA, MP3, 
DD(AC3). Video image resolution should not 
be more than 1280x720.

  The above list of extensions and codecs 

is for information only and is not a guarantee 
that all files having the above extensions and 
codecs sohuld be read by this unit.

•  USB file systems supported: NTFS, FAT16, 

FAT32. 2.0 USB version is supported, maximum 
capacity is 500 Gb. Max. load: DC5V, 500 mA. 
For correct and satisfactory operation, licensed 
USB devices of famous brands should be 
used with this unit. Avoid using USB devices of 
unknown brands. Playback of some file formates 
cannot be supported.

According to the USB 1.1/2.0 Standard, 

usage of a USB device with power current 
consumption exceeding 500 mA is not 
recommended without supplementary power 
supply. Failure to use supplementary power for 
connected USB drives with power consumption 
exceeding this value as well as defective 

USB drives may cause mechanical or thermal 
changes of elements of this unit as well as 
failure of internal elements of the USB port. 
Such damages are not warrantee cases.

Warning: usage of external USB drives 

containing BIN files in the root directory may 
cause malfunction of the unit or damage to the 
software.

Operations of file playback

•  Insert a USB into the USB jack. Select 

USB source and press ENTER button on the 
RC or VOL+/VOL- button on the unit. The 
screen will show a USB playback window, in 
which you can select Music, Photo, Movie and 
Text contents to play by pressing LEFT/RIGHT 
cursor buttons and ENTER button.

•  Press cursor buttons to select Return 

option and press ENTER button on the RC or 
CH+/CH- button on the unit if you want to go 
back to the previous menu.

•  In the content menu, press cursor buttons 

to select folder, press ENTER button on the 
RC or press and hold CH+/CH- button on the 
unit to enter it, then press cursor buttons to 
select the file you want to watch or to listen to. 
When highlighting the file, the file information 
will appear on the right and picture will be 
previewed in the center (not available for music 
files). Press   button on the RC or press and 
hold CH+/CH- button on the unit to play the 
selected file.

•  While playback, press INFO button; the 

bottom of the screen will show playback menu 
in which you can select an operation by LEFT/
RIGHT cursor buttons on the RC or perform 
this operation by pressing ENTER button on 
the RC.

•  While playback, press   button to pause 

or resume playback. Press   button to stop 
playback.

•  When you select a file to play, you can 

delete the selected file by pressing Red button, 
then ENTER on the RC.

•  When playing photo, movie and music 

files, you can press REPEAT button to select