LED Samsung QE55LS01BAUXCE - Инструкция по эксплуатации - Страница 13

02  Initial Setup

When you turn on your TV for the first time, it immediately 
starts the Initial Setup. Follow the instructions displayed on the 
screen and configure the TV's basic settings to suit your viewing 
environment.

Using the TV Controller

You can turn on the TV with the 

TV Controller

 button on the 

lower-left corner of the back of the TV, and then use the 

Control 

menu

. The 

Control menu

 appears when the 

TV Controller

 button 

is pressed while the TV is On.
To run an item on the menu, move the 

TV Controller

 button up, 

down, left, or right to move the focus to it, and then press the 

TV 

Controller

 button.

TV Controller

 button

Control menu

Remote control sensor

 / 

Microphone switch

How to turn on and off the Microphone

Off

On

You can turn on or off the microphone by using the switch at the 
bottom of the TV. If microphone is turned off, All voice and sound 
features using microphone are not available.

 • The position and shape of the microphone switch may differ 

depending on the model.

 • During analysis using data from the microphone, the data is 

not saved.

03  Using the NFC on TV function

You can use the 

NFC on TV

 function to listen to your mobile 

device sound through the TV speaker.

1. 

Unlock the screen on your mobile device.

2. 

Activate the NFC feature (Standard mode) on your mobile 
device.

3. 

Place your mobile device on the top of the TV where an NFC 
mark exists.

4. 

Follow the instructions on the screens of the TV and your 
mobile device to complete the setup.

5. 

When your mobile device is connected to the TV, the music 
being played on the device is automatically played by the TV. If 
no music is being played on your mobile device, select a media 
content item on the device.

–

When the TV is connected to the Internet, 

Ambient Mode

is automatically entered, and then the selected media 
content is played.

6. 

The selected media content is played through the TV speaker.

 • If the 

NFC on TV

 function does not work properly, repeat the 

steps above.

 • Once the connection has been complete, keep touching the 

mobile device against the NFC mark on your TV until the 
mobile device and TV respond (it may take a few seconds).

 • The 

NFC on TV

 function may not be supported depending on 

your mobile device. Refer to the user manual of your mobile 
device to check if it supports the NFC feature.

 • For the exact location of the NFC reader on your mobile device, 

refer to the user manual of your mobile device.

 • This function is only available on NFC-enabled mobile devices 

with Android 4.1 or later installed.

1

3

2

4

English - 5

Engl
ish