Panasonic 32J330E - Инструкция по эксплуатации - Страница 20

English

   - 19 -

Now/Next Schedule

In this layout option, only the current and next events 

of the listed channels will be displayed. You can use 

the directional buttons to scroll through the list of the 

events.
Press 

Back/Return

 button to use available tab options. 

Highlight 

Filter

 tab and press 

OK

 to see the filtering 

options. To change the layout highlight 

Timeline 

Schedule

 and press 

OK

.

Event Options

Use the directional buttons to highlight an event 

and press 

OK

 button to display 

Options

 menu. The 

following options are available.

Select Channel: 

Using this option, you can switch 

to the selected channel in order to watch it. The 

programme guide will be closed.

More Info:

 Display detailed information on the selected 

event. Use up and down directional buttons to scroll 

through the text.

Set Timer on Event / Delete Timer on Event: 

Select 

Set Timer on Event

 option and press 

OK

. You can set 

timers for future events. To cancel an already set timer, 

highlight that event and press the 

OK

 button. Then 

select 

Delete Timer

on Event 

option. The timer will 

be cancelled.

Notes:

 You cannot switch to any other channel while there is 

an active timer on the current channel.
It is not possible to set timer for two or more individual events 

at the same time interval.

Teletext Services

Press the 

Text

 button to enter. Press again to activate 

mix mode, which allows you to see the teletext page 

and the TV broadcast at the same time. Press once 

more to exit. If available, sections in the teletext pages 

will become colour-coded and can be selected by 

pressing the coloured buttons. Follow the instructions 

displayed on the screen.

Digital Teletext

Press the 

Text

 button to view digital teletext information. 

Operate it with the coloured buttons, cursor buttons 

and the 

OK

 button. The operation method may differ 

depending on the contents of the digital teletext. Follow 

the instructions displayed on the digital teletext screen. 

When the 

Text

 button is pressed again, the TV returns 

to television broadcast.

Software Upgrade

Your TV is capable of finding and updating the firmware 

automatically via the broadcast signal. 

Software upgrade search via user interface

On the main menu select

 Settings>System

 and then 

More

. Navigate to 

Software upgrade 

and press the 

OK

 button. Then select 

Scan for upgrade

 and press 

OK

 button to check for a new software upgrade.

If a new upgrade is found, it starts to download the 

upgrade. After the download is completed, a warning 

will be displayed, press 

OK

 button to complete software 

upgrade process and restart TV.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock 

if 

Automatic scanning

 option is set to 

Enabled

 and 

if the TV is connected to an aerial signal. If a new 

software is found and downloaded successfully, it will 

be installed at the next power on. 

Note:

 Do not unplug the power cord while led is blinking during 

the reboot process. If the TV fails to come on after the upgrade, 

unplug, wait for two minutes then plug it back in.

All updates are automatically controlled. If a manual search 

is carried out and no software is found then this is the current 

version.

Troubleshooting & Tips

TV will not turn on

Make sure the power cord is plugged in securely to  a 

wall outlet. Press the Power button on the TV. 

Poor picture

•  Check if you have correctly tuned the TV.
•  Low signal level can cause picture distortion. Please 

check antenna connections.

•  Check if you have entered the correct channel 

frequency if you have performed manual tuning. 

No picture

•  TV is not receiving any signal. Make sure the correct 

source has been selected.

•  Is the antenna connected properly? 
•  Is the antenna cable damaged? 
•  Are suitable plugs used to connect the antenna? 
•  If you are in doubt, consult your dealer.

No sound

•  Check if the TV sound is muted. Press the 

Mute

button or  increase the volume to check.

•  Sound may be coming from only one speaker. Check 

the balance settings from Sound menu.

Remote control - no operation

•  The batteries may be exhausted. Replace the 

batteries. 

•  The batteries maybe inserted incorrectly. Refer to 

the section “Inserting the Batteries into the Remote”. 

No signal on an input source

•  It is possible that no device is connected.
•  Check the AV cables and connections from your 

device.

•  Check the device is switched on.