LG O65G3 (OLED65G36LA) - Инструкция по эксплуатации - Страница 18

18

The descriptions in this manual are based on the buttons on the remote 
control. Please read this manual carefully and use the TV correctly.
(Some buttons and services may not be provided depending on models or 
regions.)

How to register the Magic Remote 

Control

To use the Magic Remote, first pair it with your TV.
1  Put batteries into the Magic Remote and turn the TV on.
2  Point the Magic Remote at your TV and press the 

 Wheel (OK)

 on the 

remote control.

*  If the TV fails to register the Magic Remote, try again after turning the TV 

off and back on.

How to deregister the Magic Remote 

Control

Press the   

(Back)

 and   

(Home)

 buttons at the same time, for five 

seconds, to unpair the Magic Remote with your TV.
*  Press and hold the   

(Home)

 and   

(Q. Settings)

 buttons for more 

than 5 seconds to disconnect and re-register the Magic Remote at the 
same time.

•

It is recommended that an Access Point (AP) be located more than 
0.2 m away from the TV. If the AP is installed closer than 0.2 m, the 
Magic remote control may not perform as expected due to frequency 
interference.

Using Always Ready

(Depending on model)
You can operate the TV and connect to Bluetooth with direct voice recognition 
while the power is off.
* 

→

 [

] 

→

 [General] 

→

 [Always Ready], setting [Enable the 

function] to on.

*  Pressing the   button while watching TV switches the screen to [Always 

Ready] that is turned on, and pressing the   button once more turns the 
screen to [Always Ready] that is turned off.

*  Press the   

(Home)

 button or the   

(Back)

 button to watch TV when 

the screen is in [Always Ready] that is turned on.

*  Press the 

 Wheel (OK)

 button to display the wallpaper when the screen 

is in [Always Ready] that is turned off, and press the   button to watch TV.

 Note

•

Using Always Ready may increase energy consumption.

•

For more information about the feature, refer to the   

→

 [

] 

→

[Support] 

→

 [User Guide] 

→

 [Troubleshooting] 

→

 [Learn More About 

Always Ready].

Connecting Smart Devices using NFC 

Tagging

NFC is technology that uses Near Field Communication (13.56 MHz), allowing 
you to conveniently send and receive information without separate settings. 
By bringing a smart device near the NFC-enabled remote control, you can 
install the LG ThinQ app and connect the device to the TV.
1  Turn on NFC in the smart device’s settings. To use NFC with Android 

devices, set the NFC option to enable ‘read/write tags’ in the smart 
device's settings. The NFC settings may vary depending on the device.

2  Bring the smart device near the   (NFC) on the remote control. The 

required distance for NFC tagging is about 1 cm.

3  Follow the instructions to install the LG ThinQ app on your smart device.
4  Retagging the smart device to the remote control allows you to 

conveniently access various features on the connected TV through the LG 
ThinQ app.

 Note

•

This feature is available for NFC-enabled smart devices only.

•

This feature is only available if the remote control has an NFC logo.

Specifications

Specifications (PM23GN)

Frequency range

Output Power (Max.)

Bluetooth

2,400 to 2,483.5 MHz

8 dBm

NFC

13.553 to 13.567 MHz

-9.95 dBuA/m @ 10 m