LG O55G3 (OLED55G36LA) - Инструкция по эксплуатации - Страница 6

6

Before Installation

(Except for OLW480B, LSW440B)

•

Do not use the product for any purpose other than installing the TV on 
a wall.

•

Avoid product damage and safety accidents caused by careless installing 
or use of improper or unauthorized wall mount.

•

Follow the instructions in the installation manual for a convenient 
installation of the wall mount.

•

Immediately discontinue installation and contact the service centre if 
you cannot fully understand the installation process.
Use a professional installer if any installation issues remain after the 
inquiry.

•

Installation of this product on a concrete wall or wood stud is 
recommended. Installation of this product on other surfaces (Dry wall, 
plywood, bricks, etc.) is not recommended. Improper installation may 
result in the product falling.

•

Install the product only on a vertical wall.
Do not install on a tilted wall that exceeds building standards or on the 
heavily titled wall or ceiling.
LG is not responsible for problems caused by improper installation of the 
product, e.g., heavily tilted walls and ceilings.

•

Check the enclosed accessories before installation. We are not 
responsible for any lost or damaged accessories after the inner 
packaging is opened.

•

When an infant or small child swallows the enclosed accessories, 
various safety accidents such as choking may occur. Keep the enclosed 
accessories out of the reach of infants and children.

•

When tightening screws, tighten until fully snug.
Avoid using excessive force when tightening the screws. Doing so may 
damage the wall and product or reduce the rigidity or performance of 
the product.

•

Avoid installing a TV that exceeds the specified tensile load, and do not 
allow any external force to be applied to the product.

•

Avoid accidents by using work tools with care during installation.

Tools for Installation

•

“+” shaped screwdriver (manual or electric) / level / drill / Ø 8 mm drill 
bit for concrete or Ø 4 mm drill bit for steel

Securing TV to the Wall

(Except for OLW480B, LSW440B)

•

Please use the TV close to the wall after installation.

How to fix anchors and screws

(Except for OLW480B, LSW440B)
Please make sure that:

•

Check that the material and thickness of the wall and finishing material 
comply with the installation manual. Before beginning the mounting 
process, you must be sure the wall is able to support the weight of the 
TV.

•

Should use the enclosed anchors and screws on crack-free concrete walls.

•

Never install the product on a plasterboard or wall made of paper or 
medium-density fiberboard (MDF). When it is necessary to install the 
product on such wall, anchor screws must be fastened to retaining walls 
(concrete) or wood Stud inside the finishing material.

•

The wall mount should be attached to a stud. This usually will not be a 
problem, but depending on individual circumstances, there may be cases 
when the ability to mount into a stud is not possible. In this case, there 
are a variety of drywall anchors, such as toggle bolts, which may provide 
a solution. If using drywall anchors, please be sure the anchors and the 
wall have the ability to support the weight of your TV. Please note that 
the supplied anchors may not be the correct ones for your individual 
situation, so you should check with a local professional.

•

Other unspecified walls must be capable of supporting pullout loads of 
over 70 kgf (686 N) and shear loads of over 100 kgf (980 N) per fastener.

•

Use an Ø 8 mm drill bit for concrete and a hammer (impact) drill or Ø 
4 mm drill bit for wood stud to drill holes.