LG 55UQ91006LA - Инструкция по эксплуатации - Страница 5

5

•

Remove the stand before installing the TV on a wall mount by 
performing the stand attachment in reverse.

•

For more information of screws and wall mount bracket, refer to the 
Separate purchase.

•

If you intend to mount the product to a wall, attach VESA standard 
mounting interface (optional parts) to the back of the product. When 
you install the set to use the wall mounting bracket (optional parts), fix 
it carefully so as not to drop.

•

When mounting a TV on the wall, make sure not to install the TV by 
hanging the power and signal cables on the back of the TV.

•

Do not install this product on a wall if it could be exposed to oil or oil 
mist. This may damage the product and cause it to fall.

•

When installing the wall mounting bracket, it is recommended to cover 
the stand hole using tape, in order to prevent the influx of dust and 
insects. (Depending on model)

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

•

Use a signal splitter to use more than 2 TVs.

•

If the image quality is poor, install a signal amplifier properly to improve 
the image quality.

•

If the image quality is poor with an antenna connected, try to realign the 
antenna in the correct direction.

•

An antenna cable and converter are not supplied.

•

For a location that is not supported with Ultra HD broadcasting, this TV 
cannot receive Ultra HD broadcasts directly.

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable 
(75 Ω). (Depending on model)

Starting TV

Turning on the TV

You can simply operate the TV functions, using the button.

Power On (Press)
Power Off

1)

 (Press and Hold)

Menu Control (Press

2)

)

Menu Selection (Press and Hold

3)

)

1)  All running apps will close, and any recording in progress will stop. 

(Depending on country)

2)  You can access and adjust the menu by pressing the button when TV is on.
3)  You can use the function when you access menu control.

 Note

•

If the TV is turned on for the first time after it was shipped from the 
factory, initialization of the TV may take a few minutes.

•

Your TV’s OSD (On Screen Display) may differ slightly from that shown 
in this manual.

•

The device must be easily accessed to a location outlet near the access. 
Some devices are not made by turning on / off button, turning off the 
device and unplugging the power cord.