Kivi 32F750NB - Инструкция по эксплуатации - Страница 15

In  addition  to  hardware-related  malfunctions,  if  there  are  any  non-standard  operations, 

power me off for 30 seconds.

Unstable or 

missing 

broadcast / 

cable TV signal

1. I'm on the 

antenna, but I 

cannot find 

channels, and I 

broadcast channels 

with image 

distortion or audio 

interruptions.

1. For stable reception of DVB-T2 (digital) and ATV (analog) signals, use an external 

antenna with an amplifier (gain 30 dB and more).
Additional power to the antenna input is already transmitted and cannot be 

supplied via my USB ports.
Point your antenna toward the nearest TV tower.
If you are using a room antenna, raise it higher, rotate it around your own axle, and 

move it around the room.
Make sure that you have selected an antenna in the settings ->Channel -> channel 

setup mode menu.
Configure the channels manually.
For a stable image and sound, the indicators shall be from 50% or higher.
Check the integrity of the cable.

2. I'm cable, but I 

don't find 

channels, and I 

broadcast 

channels with 

image distortion 

or audio 

interruptions.

2. If you are using cable TV (DVB-C) or a common house antenna, I recommend 

connecting without a splitter. If possible, connect me to another antenna cable.

Make sure that you have selected an antenna in the Settings -> Channel -> Channel 

setup mode menu.
Configure the channels manually.
Check the integrity of the cable.
Use a signal amplifier.

Sound is

not played on

external 

speakers

1. Connecting 

speakers via 

Bluetooth

1. Connect Bluetooth speakers via the Settings menu – Remote controls and 

accessories

- Add a device.

2. Connect speakers 

via HDMI

2. Connect the speakers to me via the HDMI (ARC) Jack.

In the Settings menu -> Sound -> Speakers — select "External audio system". In the 

Settings menu –> Device Settings -> Inputs - > HDMI EDID version

- set the value to "EDID 1.4".
In Settings menu -> Device Settings - > Sound -> digital output - select Auto, Skip, 

PCM, etc.

3. Connect 

speakers via AUX 

(3.5 mm 

headphone jack)

3. Make sure that the audio cable is inserted all the way into the 3.5 jack.

4. Connecting 

speakers via optics

4. Attach the speakers to the OPTICAL connector.

In the Settings menu - > Device Settings - > Sound -> Digital output-> select Auto, 

Skip, PCM, etc.

Use the VOL button on the remote control to turn down the sound volume until it is 

completely turned off. Use the remote control from the speakers to increase the 

sound to the desired level.

WHEN SOMETHING GOES WRONG

EN

kivismart.com

14