Kivi 24H740LB - Инструкция по эксплуатации - Страница 16

Main menu -> Settings -> Channel -> Channel 

installation mode

Select a mode, select Antenna.

Go to Main Menu -> Settings -> Channel -> 

Channels.

Start scanning in the selected mode.

Main menu -> Settings -> Channel -> Channel 

installation mode

Select a mode, select Cable TV.

Select Main Menu - Settings - Channel - 

Channels.

Antenna

Cable

Select the channel scan mode, with a choice 

of local operators and the default scan 

mode.

Channel scan: automatic search with the 

ability to set some parameters (Advanced, 

Full, Fast).

Single RF Channel Scan: Manual Scan

You can also manually tune the channels if 

necessary or change their distribution in 

the list.

Note:

 The aspect ratio mode in the "Full 

Screen" image settings is intended for use 

with external sources connected via HDMI (in 

particular, a PC). The work of broadcast 

channels with this setting may differ from 

standard work.

System settings and functions

Inputs:

 Configuring TV operation with 

external devices.

Control HDMI devices: 

Activates the 

submenu of HDMI CEC functions.

CEC/ARC:

 Consumer Electronics Control 

(CEC) - consumer electronics management. 

ARC is an updated CEC technology and 

stands for Audio Return Channel.
By connecting an ARC / CEC-enabled device 

to the HDMI ARC port on your TV, you can 

control the power, volume, and other 

functions using your TV remote. In most 

cases, it will also be easy to transfer the TV 

sound to the device automatically, without 

turning off the built-in TV speakers. The 

connected device must also support ARC 

for this function to work.
Activate the function in HDMI settings

Automatically disconnect device: 

discon-

nect HDMI devices together with the TV.

Automatically turn on the TV: 

automatically 

turn on TV with HDMI device.

HDMI EDID ver.:

 setting the EDID version.

Signal sources (inputs)

15

EN