Sony KV-AZ212M91 - Инструкция по эксплуатации - Страница 20

Presetting channels manually

1

After selecting “Manual Program”, select the program
number to which you want to preset a channel.

(1) Make sure “Program” is selected, then press 

.

(2) Press 

V

 or 

v

 until the program number you want

to preset appears on the menu, then press 

.

2

Select the desired channel.

(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press

.

(2) Press 

V

 or 

v

 until the desired channel’s broadcast appears on the TV screen,

then press 

.

3

If the sound of the desired channel is abnormal, select the appropriate TV
system.

(1) Press 

V

 or 

v

 to select “TV System”, then press 

.

(2) Press 

V

 or 

v

 until the sound becomes normal, then press 

.

4

If you are not satisfied with the picture and sound quality, you may be able
to improve them by using the “Fine” tuning feature.

(1) Press 

V

 or 

v

 to select “Fine”, then press 

.

(2) Press 

V

 or 

v

 to select “Manual”, then press 

.

(3) Press 

V

,

v

,

B

 or 

b

 until the picture and sound quality are optimal, then press 

.

The + or – icon on the menu flashes while tuning.

5

If the TV signal is too strong (picture distorted; picture with lines; signal
interference) or weak (snowy picture), you may be able to improve the
picture quality by setting the “Signal Booster” feature.

(1) Press 

V

 or 

v

 to select “Signal Booster”, then press 

.

(2) Press 

V

 or 

v

 to select either “Off” (for picture distorted; picture with lines;

signal interference) or “Auto” (for snowy picture), then press 

.

Changing the “Channel Setup” setting (continued)

01GB05ADJ-SOEMRus.p65

5/15/07, 2:07 PM

20