Sony KV-29FX64K - Инструкция по эксплуатации - Страница 21

22

Troubleshooting

Here are some simple solutions to the problems which may affect the picture and sound.

Additional Information

If you continue to experience problems, have your TV serviced by qualified personnel.

Never open the casing yourself.

Problem

No picture (screen is dark) and no 

sound.

Poor or no picture (screen is dark), but 

good sound.

No picture or no menu information 

from equipment connected to the Scart 

connector.

Good picture, no sound.

No colour on colour programmes.

Distorted picture when changing 

programmes or selecting teletext.

Wrong characters appear when 

viewing teletext.

Picture slanted

Noisy picture when viewing a TV 

channel.

No unscrambled or unstable picture 

whilst viewing an unscrambled 

channel with a decoder connected 

through the Scart connector 

2

/

2

.

Remote control does not function.

The standby indicator  

 on the TV 

flashes. 

Solution

• Check the aerial connection.

• Plug the TV in and press the 

 button on the front of the 

TV. 

• If the standby indicator 

 is on, press 

TV

 button on

  the remote control. 

• Using the menu system, select the “Picture Adjustment” 

menu and select “Reset” to return to the factory settings.

• Check that the optional equipment is on and press the

 button repeatedly on the remote control until the

  correct input symbol is displayed on the screen. 

• Press the  

 +/- button on the remote control. 

• Check that “TV Speakers” is “On” in the “Detail Set Up”

  menu.

• Check that headphones are not connected.

• Using the menu system, select the “Picture Adjustment” 

menu and select “Reset” to return to factory settings.

• Turn off any equipment connected to the Scart

  connector on the rear of the TV.

• Using the menu system, enter the “Language/Country” 

menu and select the country in which you operate the TV 

set. For cyrillic languages, we recommend to select Russia 

if your own country does not appear in the list.  

• Using the menu system, select the “Picture Rotation”

  option in the “Detail Set Up” menu to correct the picture 

slant.

• Using the menu system, select the “Manual Programme 

Preset” menu and adjust Fine Tuning (AFT) to obtain 

better picture reception.

• Using the menu system, select the “Noise Reduction”

  option in the “Detail Set Up” menu and select “Auto” to 

reduce the noise in the picture.

• Using the menu system, select the “Set Up” menu. Then 

enter the “Detail Set Up” option and set “AV2 Output” to 

“TV”.

• Check that the Media Selector on the remote control is set 

according to the device you are using (VCR, TV or DVD).

• If the remote control does not operate the VCR or DVD 

even when the Media Selector has been set correctly. Enter 

the necessary code set as explained on “Remote Control 

Configuration for VCR/DVD” chapter of this instruction 

manual.

• Replace the batteries.

• Contact your nearest Sony service centre.