Philips 29PT5107 - Инструкция по эксплуатации - Страница 3

3

Remote control keys

To display / clear the program number,

name (if it exists), time, audio mode and

time remaining for the sleep feature.

Press the key for 5 seconds to activate

permanent display of the number.This

key is also used to exit from the menu.

Screen information / permanent no.

Surround Sound 

(only available

on certain versions).

To activate /

deactivate the surround sound

effect. In stereo, this gives the

impression that the speakers are

further apart. For models equipped

with Virtual Dolby Surround*, you

can experience Dolby Surround

Pro Logic sound effects. In mono, a

stereo spatial effect is simulated.

VCR key *

Pre-set sound

Used to access a series of stored

settings:

Speech

,

Music

,

Theatre

and return to 

Personal

.

Menu

To call up or exit the menus.

Volume

To adjust the sound level

Cursor / Format 

These 4 keys are used to navigate

through the menus. The 

îÏ

keys are used to enlarge or

compress the picture vertically.

Number keys

Direct access to the programmes.

For a 2 digit program, enter the

2nd digit before the dash

disappears.

Selection of EXT socket

Press several times to select

EXT1, EXT2, S-VHS and AV.

Radio / TV mode
To switch the TV set to radio or
TV mode (for versions equipped
with radio).

Standby
Lets you place the TV set on
standby. To turn on the TV, press

P

@ @

,

b

,

0

to 

9

(or 

Â

).

Teletext keys (p. 8), VCR keys
(p.11) and list of radio stations 

ı

(p. 5)

Sleep
To select an automatic standby after a
preset time (from 0 to 240 minutes).

To enlarge or compress the
picture vertically

Pre-set image
Used to access a series of stored
settings:

Rich

,

Natural

,

Soft

,

Multimedia

and return to 

Personal

.

Mute

To mute or restore the sound.

Program selection 
To access the next or previous
programme. The number, (name)
and sound mode are displayed for
a few moments.

For some programs, the title of the
program will be displayed at the
bottom of the screen.

Sound mode

(only available on

stereo versions)

Used to force programmes in

Stereo

to 

Mono

or, for bilingual

programs, to choose between 

Dual

I

or 

Dual II

. For TV sets equipped

for Nicam reception, depending on
the programmes, you can force the

Stereo Nicam

sound to 

Mono

or

select between 

Nicam Dual I

,

Nicam Dual II

and 

Mono

.

The 

Mono

indication is red when in

forced position.

Teletext (p. 8)

Teletext keys (p.8)
or VCR keys *

* “Dolby” and the double-D symbols 

£

are trademarks of the Dolby
Laboratories Licensing Corporation.
Manufactured under license of Dolby
Laboratories Licensing Corporation.

* VCR key

The remote control lets you control the main functions of the VCR.
Press and hold down the VCR key located on the side of the remote control, then press one of the keys to access
the VCR  functions:

b

% ∫

H îϠȬ

P

@# · ¢ Ê Æ 09

The remote control is compatible with all VCRs using the RC5 standard.