Telefunken TF-DVBT229 - Инструкция по эксплуатации - Страница 5

Connection

Connection

Connection

4

Antenna input
• Connect an external DVB-T/T2 antenna

(cable) connector to the antenna input RF IN.

  The signal in the block cable antenna 

can fail to contain DVB-T/T2 signal due to the 
carrier frequency altered by the cable network 
operator. 

  In order to receive digital air TV signal 

use an indoor or outdoor UHF antenna. Specify 
the possibility and quality of digital air signal 
with your local digital TV service providers. The 
absence of a stable TV signal in your area can-
not be a reason for returns or refunds without 
an additional test of TV signal reception in your 
area.

  To increase the reception quality of 

the state digital air television in rural areas or 
at significant distances from a broadcasting 
center we recomment using individual active 
outdoor UHF antennae with a high resistance 
factor, and placing them at maximum possible 
heights.

Power adaptor input
• Connect the DC power adaptor to this

input and plug it into the electrical outlet.

Loop output

•

Connect the LOOP 

OUT 

jack to TV's

antenna input using a special adapter (not 
included) for supplying an analog TV signal.

HDMI-out

•

If your TV has an HDMI video input,

connect it to an HDMI output of this unit using 
a

n

 HDMI cable (included).

Stereo audio output

•

Connect the 

left (white) and right (red)

terminals of the stereo audio output to the 
corresponding audio inputs on your TV using 

4

an RCA cable.

CVBS output

•

Connect the 

yellow composite

video output to the composite video input on 
your TV using an RCA cable.