VERTO 51G517 - Инструкция по эксплуатации - Страница 8

8

GWARANCJA I SERWIS

Warunki gwarancji oraz opis postepowania w przypadku reklamacji 
zawarte są w załączonej Karcie Gwarancyjnej.

Serwis Centralny
GTX Service 

tel. +48 22 573 03 85

Ul. Pograniczna 2/4 

fax. +48 22 573 03 83 

02-285 Warszawa 

e-mail service@gtxservice.pl

Sieć Punktów Serwisowych do napraw gwarancyjnych 
i pogwarancyjnych dostępna na platformie internetowej 

gtxservice.pl

Grupa Topex zapewnia dostępność części zamiennych oraz 
materiałów eksploatacyjnych dla urządzeń i elektronarzędzi.

Pełna oferta części i usług na 

gtxservice.pl

. Zeskanuj kod QR i wejdź:

TRANSLATION OF THE ORIGINAL 

INSTRUCTIONS

HOT AIR GUN 

 51G517

CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL 
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.

DETAILED SAFETY REGULATIONS

SPECIFIC REGULATIONS REGARDING SAFE USE OF HOT AIR GUN

This equipment is not designed for use by persons (including 
children) with limited physical, sensory or mental abilities, persons 
with insufficient experience or knowledge about device, unless under 
supervision or acting in accordance with instructions regarding use 
of equipment provided by persons responsible for their safety. Pay 
attention to children, do not allow to play with the equipment.

Careless handling of the hot air gun may cause fire, therefore:

– be careful when using the hot air gun in places, where flammable 

materials are present;

– do not direct stream of hot air onto the same place for a long time;

– do not use hot air gun in explosive atmosphere;

– bear in mind that heat can transfer to flammable materials that 

are beyond field of view;

– leave the hot air gun to cool down after use and before storing;

– do not leave the hot air gun unattended.

ADDITIONAL SAFETY RULES

•

Use protective goggles when operating the hot air gun.

•

Do not obstruct air intake holes or outlet nozzle hole of the hot air gun.

•

Do not touch nozzle of the hot air gun during operation or just after.

•

Keep the hot air gun handle clean, do not allow traces of oil or grease.

•

When working outdoors do not use hot air gun when it is raining 
or in high humidity.

•

Do not put the hot air gun away when it is switched on. 

•

Do not direct flow of hot air from the gun at one point for a long time.

•

Always switch off the hot air gun with its switch before removing 
the power cord plug from mains socket.

•

Remove particles of paint deposited on the nozzle of hot air gun 
from time to time to prevent spontaneous ignition.

•

Prior to commencing any tasks with hot air gun, always ensure that 
the surface to be heated is not flammable.

•

Removing oil paint that contains lead can be carried out in rooms 
with good ventilation only. Vapours of such paints are poisonous. 
Use mask for protection of respiratory system.

•

When using hot air gun do not use agents such as turpentine, 
solvents or petrol.

•

Do not touch hot parts of the gun just after its operation has been 
finished. Burns resulting from negligence of these rules constitute 
main hazard when working with hot air gun.

•

Never point operating hot air gun at any person or animal (e.g. to 
dry hair). Hot air gun produces much higher temperature than hair 
dryer does.

CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and 
additional safety systems are used, nevertheless there is always 
a small risk of operational injuries.

CONSTRUCTION AND USE

Hot air gun is a hand-held power tool with insulation class II. Double 
insulation of the hot air gun and integrated protection against 
overheating (thermal switch) ensure safe operation. It is equipped 
with AC motor that drives small turbine inside, which forces air to flow 
through heating element. Stream of air is then directed through outlet 
nozzle towards processed surface. Design of the hot air gun allows 
to use one of the tempeerature ranges to adjust air temperature for 
requirements of the task. Hot air gun is designed for paint coating 
removal, heating up stuck threaded joints to aid in unscrewing and to 
heat up frozen water piping, locks, padlocks etc. Hot air gun can also 
be used for drying wooden elements before mechanical processing, 

GB