Сварочное оборудование FUBAG TR 200 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
O
m
perator's
anual
www.fubag.ru
6. Maintenance
Warning!
Never remove the cover or operate with the welding machine without unplug the main
power supply before. Moreover consider that some time after switch off the machine and some
components remain under voltage and can cause the electrical shocks.
- Check the interior of the machine according to its use and dustiness
of place. When
removing dust from transformer, reactance and rectifier always use dry compressed air at
a pressure of not more than max 10 bar.
- At the same time verify that electric connections are tight and check wiring for insulation failure.
When control operation is over, replace covers and check for screws to be tight.
- Never weld while machine is open!
7. Transport & torage
8. Warranty
s
When the welder is in storage and transportation, please try to keep it from being exposed to the
rain. When loading, attach ATTENTION to the welder packing. It is recommended to free it from
moisture, erodible gas and dust in storage where it must be kept dry and have good ventilation. The
tolerable temperature ranges from -25 to +55
, and the relative humidity can not be more than 90%
(25
).
After the package has been opened, it is suggested to repack the product as per requirement for
future storage and transport.
The manufacturer warranties the normal working of the machine within 12 months from the date of
its sale through retail network as well its repair and components replacement untimely broken
through manufacturer's fault providing observance of all requirement by installation, operation and
periodic maintenance.
Warranty refer to defects of materials and components and do not refer to components subject to
natural wear and maintenance work.
Only machines cleaned from dust and dirt in original factory packing fully completed, provided with
instruction manual, warranty card with fixed sales date with a shop stamp factory serial number and
originals of sales and ware receipt issued by salesman are subjects of warranty. Within the warranty
period the service center eliminate free of charge all detected production defects. The manufacturer
disclaims warranty and legal responsibilities if nonobservance of the instruction manual by user,
unqualified disassembling repair or maintenance of the machine as well does not bear responsibility
for caused injury to persons or damages.
°C
°C
-
-
7
www.fubag.ru
