Ryobi R18WDV-0E (5133004724) - Инструкция по эксплуатации - Страница 17

3

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

EL

the batteries should be removed.

■

The supply terminals are not to be short-circuited.

■

Under extreme usage or temperature conditions, 
battery leakage may occur. If liquid comes in contact 
with your skin, wash immediately with soap and water. 
If liquid gets into your eyes, flush them with clean water 
for at least 10 minutes, then seek immediate medical 
attention. Following the rule will reduce the risk of 
serious personal injury.

■

Do not dispose of used battery packs in the household 
refuse or by burning them. Take them to an appropriate 
disposal/collection site.

ADDITIONAL BATTERY SAFETY WARNINGS

 WARNING

To reduce the risk of fire, personal injury, and product 
damage due to a short circuit, never immerse your 
tool, battery pack or charger in fluid or allow a fluid to 
flow inside them. Corrosive or conductive fluids, such 
as seawater, certain industrial chemicals, and bleach 
or bleach-containing products, etc., can cause a short 
circuit.

TRANSPORTING LITHIUM BATTERIES

■

Transport the battery in accordance with local and 
national provisions and regulations.

■

Follow all special requirements on packaging and 
labelling when transporting batteries by a third party. 
Ensure that no batteries can come in contact with other 
batteries or conductive materials while in transport by 
protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport batteries 
that are cracked or leaking. Check with the forwarding 
company for further advice.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 
impossible to completely eliminate certain residual risk 
factors. The following hazards may arise and the operator 
should pay special attention to avoid the following:

■

Use the product only for its intended use. Do not alter 
or modify the unit from the original design or function.

■

Always be aware that misuse and improper handling 
of this product can cause injury to yourself and others.

■

Never vacuum materials such as hot coals, cigarette 
butts, matches, etc.

KNOW YOUR PRODUCT

See page 107.

1. Carrying handle
2. On/off button
3. Blower port
4.  Telescopic wand clip
5. Accessory holders
6. Latch
7.  Telescopic wand holder
8. Castors

9.  Foam sleeve filter
10. Filter bag
11. Battery port
12. Accessory holder
13. Vacuum port
14. Cartridge filter
15. Hose set
16. Power tool universal adaptor
17. Crevice tool
18. Brush
19. Floor nozzle
20. Curved handle
21. Telescopic wand

MAINTENANCE

■

Cleaning and user maintenance shall not be made by 
children without supervision.

■

Refer all servicing to qualified service personnel. 
Servicing is required when the product has been 
damaged in any way, liquid has been spilled or objects 
have fallen into the product, the product has been 
exposed to rain or moisture, does not operate normally, 
or has been dropped.

■

When servicing, use only original manufacturer’s 
replacement parts. Use of any other part could create a 
hazard or cause product damage.

■

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to damage from various types 
of commercial solvents and can be damaged by their 
use. Use dry cloths to remove dirt, dust, oil, grease, etc.

■

Do not at any time let brake fluids, gasoline, petroleum 
based products, penetrating oils, etc., come in contact 
with plastic parts. Chemicals can damage, weaken or 
destroy plastic which could result in serious personal 
injury.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing 
of as waste. The machine, accessories 
and packaging should be sorted for 
environmental-friendly recycling.

SYMBOLS

Safety Alert

V

Volts

Direct current

CE conformity

EurAsian Conformity Mark

Ukrainian mark of conformity