Makita CL107FDZ - Инструкция по эксплуатации - Страница 5

5 ENGLISH

NOTE:

 Depending on the conditions of use and the 

ambient temperature, the indication may differ slightly 

from the actual capacity.

Switch action

1

2

►    

1.

 ON/speed change button 

2.

 OFF button

To start the cleaner, simply push the ON/speed change 

button. To switch off, push the OFF button.

You can change the cleaner speed in three steps by 

pushing the ON/speed change button.

The first push on this button is for high speed mode, the 

second push for max speed mode and the third push 

for normal speed. Each push on this button repeats the 

high/max/normal speed cycle alternatively.

Lighting up the lamp

CAUTION:

Do not look in the light or see the 

source of light directly.

1

2

3

►    

1.

 ON/speed change button 

2.

 OFF button 

3.

 Lamp

To turn on the lamp, push the ON/speed change button. 

Push the OFF button to turn off the lamp. During the 

tool actuating, the lamp turns on.

When the remaining battery capacity gets low, the lamp 

starts blinking.

NOTE:

 The timing, at which the lamp starts blinking, 

depends on the temperature at work place and the 

battery cartridge conditions.

ASSEMBLY

CAUTION:

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before carrying out any work on the tool.

Disposing of dust

CAUTION:

Empty the cleaner before it 

becomes too full, or the suction force weakens.

CAUTION:

Be sure to empty the inside of the 

cleaner itself of dust.

 Failure to do so may cause the 

filter to be clogged or the motor to be damaged.

CAUTION:

Never throw away the dust stopper 

because it should be used whenever either the 

dust bag or the paper filter is used.

CAUTION:

When closing the front cover, be 

careful not to pinch your fingers.

1.

  Push the button to open the front cover. Opening 

it until a click is heard allows a positive stop at that 

position.

1

2

►    

1.

 Front cover 

2.

 Button

2.

  Pull out both the orange-colored dust stopper and 

dust bag together at the same time.

1

►    

1.

 Dust stopper

3.

Remove the dust stopper and empty the cleaner.