Einhell TС-VC 1930 S - Инструкция по эксплуатации - Страница 15

GB

- 15 -

Fitting the handle (Fig. 4)

Use a screwdriver to 

fi

 t the handle (1).

5.2 Fitting the 

fi

 lters

Notice! 

Never use the wet and dry vacuum cleaner wit-

hout a 

fi

 lter.

Always ensure that the 

fi

 lters are securely seated.

Fitting the foam 

fi

 lter (Fig. 7)

For wet vacuuming, slip the supplied foam 

fi

 lter 

(16) over the 

fi

 lter basket (Fig. 2/4). The pleated 

fi

 lter (15) already 

fi

 tted upon delivery is not suita-

ble for wet vacuuming.

Fitting the pleated 

fi

 lter (Fig. 8)

For dry-vacuuming, slip the pleated 

fi

 lter (Fig. 15) 

over the 

fi

 lter basket (Fig. 2/4). The pleated 

fi

 lter 

(15) is suitable for dry-vacuuming only.

Fitting the dirt bag

(not supplied)

For vacuuming 

fi

 ne, dry dirt it is recommended 

that you also 

fi

 t the dirt bag. This will ensure that 

the pleated 

fi

 lter (15) does not clog up so quickly 

and help maintain the vacuuming power. It also 

makes it easier to dispose of the dust. Slip the 

dirt bag over the vacuuming hole. The dirt bag is 

suitable for dry-vacuuming only.

5.3 Fitting the suction hose (Fig. 9-12)

Connect the suction hose (11) to the correspon-

ding connector on the wet and dry vacuum clea-

ner, depending on the application required.

Vacuuming

Connect the suction hose (11) to the suction hose 

connector (9).

Blowing

Connect the suction hose (11) to the blow con-

nector (10).

To extend the suction hose (11) you can attach 

one or more of the elements which make up the 

3-part suction tube (12) to the suction hose (11).

5.4 Suction nozzles

Combination nozzle (13)

The dual-purpose nozzle (13) is for vacuuming 

solids and liquids over medium to large areas.

6. Operation

6.1 ON/OFF switch (Fig. 2/2)

Switch position 0: O

ff

Switch position I: Normal mode

6.2 Dry vacuuming

For dry-vacuuming, use the pleated 

fi

 lter (15). In 

addition, you can also 

fi

 t the dirt bag. (See point 

5.2)

Always ensure that the 

fi

 lters are securely seated.

6.3 Wet vacuuming

For wet-vacuuming, use the foam 

fi

 lter (16) (see 

point 5.2).

Check that the 

fi

 lter is securely seated at all times.

Water drain screw (Fig. 1)

To make the tank (8) easier to empty after wet va-

cuuming, it is 

fi

 tted with a water drain screw (19). 

Open the water drain screw (19) by turning it anti-

clockwise and drain the liquid.

When wet vacuuming, the 

fl

 oating safety switch 

(5) closes when the maximum tank level is 

reached. At the same time, the suction noise of 

the equipment will change and become louder. 

You must then switch o

ff

  the equipment and em-

pty the tank.

Danger! 

The wet and dry vacuum cleaner is not suitable 

for the vacuuming of combustible liquids. For wet 

vacuuming, use only the supplied foam 

fi

 lter.

6.4 Blowing

Connect the suction hose (11) to the blow con-

nector (10) on the wet and dry vacuum cleaner.

7.  Replacing the power cable

Danger!

If the power cable for this equipment is damaged, 

it must be replaced by the manufacturer or its 

after-sales service or similarly trained personnel 

to avoid danger.

Anl_TC_VC_1930_S_SPK7.indb   15

Anl_TC_VC_1930_S_SPK7.indb   15

27.07.2016   13:29:01

27.07.2016   13:29:01