Bort BSS-1425-PowerPlus - Инструкция по эксплуатации - Страница 6

Diagram of the machine's disassembly and assembly

The description and introduction of vacuum cleaner

"

O

" 

for power turn off

"   "

 for power turn on

Hold the handle to lift up the

machine, like the picture.

Hanging wire function

You can hang the wire 
here for storage.

Tube assembly storage 
             function

Put the tube assembly 
here for storage to 
save space.

Usage of the handle

Usage of the switch

Pull out the clips to take away 
the machine head

The connection method 

             for blowing function

Usage of the clips

The connection method 

for hose

Dust shaking function

Turn off the power, 
press the dust shaking 
button to the bottom,
 then release it quickly, 
the button will back to 
it's original position, 
operate it repeatedly 
to shaking dust.

Move the locker to left

               side, and insert the hose
               connector into the 
               suction mouth, then 
               release the locker to 
               make it tightly locked. 
              Conversely, to separate it.

Move the locker to right side,
insert the hose connector into the 
blowing mouth, then release the 
locker to make it tightly locked. 
Move the blowing control bar in left
side for blowing function on and in
right side for blowing function off.

Take away the machine head

Pull out the clips  to open, 

   conversely, to lock it.

Take off the dust shaking board

Twists off the knob anticlockwise,

        then take off the dust shaking 
        board.

Replace the HEPA filter

Twists off the HEPA 

                     clockwise to take it off.

Install the HEPA&Dust shaking board

Twists the HEPA anticlockwise to lock, 
then put the dust shaking board, 
tighten the knob.

6