Ariston ADS 1200 - Инструкция по эксплуатации - Страница 21

 - 

Instructions for installation and use

18

Settings

Press buttons   and   at the

same time for at least 

4

 seconds

to access the personalisation

menu, where you can choose

your 

language 

and the display

brightness

.

The word 

“LANGUAGE”

 will

appear; press   to display the

language set. If you want to

change the language set, just

scroll along the languages

available by pressing   and

confirm your selection by

pressing  .

To adjust the brightness of the

display, press both buttons 

and   at the same time for at

least 

4

 seconds: the word

“LANGUAGE”

 will come up; press

 to display the wording

“DISPLAY BRIGHTNESS”.

Press   to display the brightness

set; if you want to change it,

scroll along the three brightness

levels available with   and

select the desired one with  .

Special displays

After the first wash cycle…..

The water hardness level is

displayed for 10 seconds, and you

can adjust the amount of

detergent you use accordingly:

Low

Medium

High

and subsequently:

Easy iron

Press   to select the desired

function.

This option allows you to obtain

crease-free washing which is

easier to iron

.

The appliance optimises the

washing conditions according to

the type of fabrics that are being

washed.

To select it, press   until the

word 

ON 

appears   on the display.

In the 

S y n t h e t i c s  

and

Delicates

, programmes the

wash cycle is interrupted and the

washing is left to soak in water

before the appliance is drained.

To complete the cycle, press the

button.

The selection of this option is

indicated by symbol 

appearing.

Note: 

this function is not

available with the 

Stain

Removal

 option.

Special programmes

Press   to select the desired

function.

If you set this option, the

following options will be

displayed:

•

  Special 

(

OFF

)

•

  Rinse only

•

  Spin cycle only

•

  Drain

To select the desired "special

programme", press  , to

confirm your selection press  .

If you don't wish to select a

special programme, press 

when the wording 

"Special"

(

OFF

)

 comes up on the display.

Class A at 40°C

: 

Your 

 has a special programme to obtain excellent wash results even at

low temperatures.

The results are the same as you would get with a 

60°C

 wash, thanks to the washing machine's action and

to the increase in the duration of the wash.

To set this programme, place the mark situated on the knob completely to the left and set the temperature

to 

40°C

.

The wording "

CLASS A

" will appear on the display.

Daily

: 

 has a programme designed to wash lightly soiled garments in a short amount of

t i m e .

You can wash different types of fabrics together (except for wool and silk), with a maximum load of 

3 kg

.

This programme allows you to save on both time and energy as it only lasts approximately 

30

 minutes.

WE RECOMMEND THE USE OF LIQUID DETERGENT

.

To set this programme, turn the index situated on the knob to any position in the 

synthetics 

sector, select

a temperature of 

30°C

 and select the 

Rapid

 option  .

The wording "

DAILY

" will appear on the display.

Note

:

 these programmes were designed to provide you with the best performance levels and therefore

cannot be modified; you may only reduce the spin cycle speed and delay the programme start.

Special wash programmes

•

 the indication of the fabric

sector selected (COTTON,

COLOURS, SYNTHETICS,

DELICATES and WOOL)

•

  the temperature corresponding

to the wash programme set

•

  the recommended wash load:

•

 after pressing 

Start

, the

estimated duration of the cycle is

displayed; if you have set the

Delay timer

   the countdown

to the wash programme start is

displayed.

During the wash cycle…

The following are displayed:

•

 the amount of time left

•

 the temperature, during the

heating phase (on the scale on the

right-hand side of the display);

once heating is over and for the

entire duration of the cycle,

  the weight of the load inside the

appliance:

•

 the wash phases (pre-wash,

heating…)

•

 the options selected.

Door locked

Symbol   on indicates that the

washing machine door is locked to

prevent it from being opened

accidentally. Wait for symbol   to

turn off before you open the

appliance door.

Error message

In the event of a fault, a message

is displayed, (e.g. 

F-01

), which

should be communicated to the

Service Centre.

End of the programme

At the end of the programme, the

word 

END 

is displayed.

If you have used too large a dose

of detergent, symbol 

 lights

up.

This washing machine

nevertheless guarantees a perfect

rinse.

T o   l o o k   a f t e r   y o u r

garments, the appliance

m a y   s o m e t i m e s   s t o p

with water in the tub,

l e a v i n g   t h e   w a s h   t o

s o a k .

Press 

to end the wash

c y c l e .

Demo Mode

The appliance is equipped with

a demo mode.

If the wording "

DEMO MODE

"

appears among the wording that

appears on the display, you

should disable it by following

these few simple steps:

- turn the appliance off at the

ON-OFF

 (

C

) button.

- keep 

Start/Reset

 (

B

) button

pressed and turn the appliance

back on at the same time.

From now on the demo mode is

no longer enabled.

HYDROSTOP