Ardesto WMS-7109DG - Инструкция по эксплуатации - Страница 76

1. 

Child Lock function:

 You can lock and unlock the child lock function by 

    pushing “Pre Delay” 3 seconds when the machine is running.

    Once the child lock function set, all the other buttons will be locked except 

    the power button. 

    When the washing process ending or push “Power” button or default 

    warning, the child lock function cannot be unlocked. It means that the child

    lock function must be unlocked by hand. When the power on and start the 

    machine, if the child lock function is going on(the lamp of child lock light up, 

    you need to push “Pre Delay” button for 3 second 

    to unlock the child lock  

    function and then continue to operate the washing machine. 

2. 

Power-off Memory:

 When there is power on again after a period of 

  power-off, the machine will continue the working process at the time 

  node of last power-off action.

3. 

Door self

-

lock:

After

selecting

procedure

,

 the

door

locked

automatically

, 

    2

minutes

after

operation

over

, 

lock

removed

.

4.

 Tub clean: 

 The program of drum clean is use the high water level, high

    water temperature, high speed to clean the drum and kill the bacteria. The

    detailed operations ways.

5. 

Add garment function:

 During the process running, if you want to add 

    garment, please push "Start/Pause"button to stop running; 

    After around 5 seconds, it has a sound of unlocking, meanwhile the door 

    lock mark in the screen disappear then you can open the door.

    Add the additional garment into the drum(Don't let the door clamp clothes, 

    this will cause failure of leakage and error).

    Forced to open the door part, damage may occur, such as safety problem.

    When there are many bubble in the inner barrel and plenty of water, open 

    the door, water and foam will flow out .

    When the inner drum is running, it is in danger status since the temperature 

    of water is above 45

℃ 

and there is plenty of water inside. At this time, the 

    door can not be forced to open. If want to open the door, please follow the 

    below instructions:

    (1) Wait till the inner drum stop running.

    (2) Wait till the water temperature cool down to below 45

℃.

If want to 

    open the door when the water temperature is above 45

℃

,please shut off 

    the power and open the door after 5 minutes.

22