Стиральная машина Zanussi FL 574CN - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

18
SOMETHING NOT WORKING
■
Problem
■
Possible cause
■
The machine does not start up:
■
Check that the door is firmly closed.
■
Check that the machine is plugged in and
that there is power at the socket.
■
Check that the main fuse has not blown.
■
Check that the programme selector dial is
positioned correctly and pulled out.
■
The machine does not fill:
■
Check that the water tap is open.
■
Check that water is coming out of the tap.
■
Check that the inlet hose is not squashed or
kinked.
■
Check that the filter in the inlet hose is not
blocked.
■
Check that the door is closed.
■
The machine does not empty
and/or does not spin:
■
Check that the drain hose is not squashed or
kinked.
■
The spin suppression
or anti-crease
option has been selected.
■
There is water on the floor:
■
Too much detergent or unsuitable detergent
(creates too much foam) has been used.
■
Check whether there are any leaks from one
of the inlet hose fittings. It is not always easy
to see this as the water runs down the hose;
check to see if it is damp.
■
Check that the drain hose is not damaged.
■
Unsatisfactory washing results:
■
Too little detergent or unsuitable detergent
has been used.
■
Stubborn stains have not been treated prior
to washing.
■
The correct temperature or programme was
not selected.
■
The machine fills then empties
immediately:
■
The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage”
section.
Problems which you can resolve yourself
Содержание
- 21 SS; SoderΩanie; Uhod za maßinoj
- 23 Opisanie maßiny; Dozator moæxego sredstva; Programmnaå karto©ka; Tehni©eskie dannye
- 24 Ustanovka maßiny; Raspakovka maßiny; Krepleniå, ustanovlennye na
- 27 Opisanie paneli upravleniå; Vybor temperaturnogo; Signalwnaå lampa
- 30 Programmy stirki; NORMALWNAÅ STIRKA - HLOPOK
- 35 Uhod za maßinoj i ©istka; Âistka korpusa maßiny; Âistka dozatora stiralwnogo
- 38 Maßina izdaet nepriåtnyj












