Стиральная машина Zanussi FJS 974 N - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

20
Som e t hing not w or k ing?
Problems which you can resolve yourself.
Proble m
Possible c a use
• T he m a c hine doe s not st a r t
up:
• T he m a c hine doe s not f ill:
• Check that the water tap is open.
• Check that water is coming out of the tap.
• Check that the inlet hose is not squashed or
kinked.
• Check that the filter in the inlet hose is not blocked.
• Check that the door is closed.
• T he m a c hine f ills t he n
e m pt ie s im m e dia t e ly:
• The end of the drain hose is too low. Refer to
relevant paragraph in “ water drainage” section.
• T he m a c hine doe s not e m pt y
a nd/ or doe s not spin:
• T he re is w a t e r on t he f loor :
• Too much detergent or unsuitable detergent
(creates too much foam) has been used.
• Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
• Check that the drain hose is not damaged.
• T he m a c hine vibr a t e s or is
noisy:
• Check that all the transit bolts and packing have
been removed.
• Check that the machine is not resting against
anything.
• Check that the support feet are resting firmly on the
ground.
• Check that the laundry is evenly distributed in the
drum.
• Maybe there is very little laundry in the drum.
• Check that the drain hose is not squashed or kinked.
• A programme which ends with water in the drum has
been selected.
• Check that the filter is clean.
• Check that the door is firmly closed.
• Check that the machine is plugged in and that there
is power at the socket.
• Check that the main fuse has not blown.
• Check that the programme selector dial is
positioned correctly.
• Check that the ON/OFF button has been depressed.












