Zanussi FCS 825 C - Инструкция по эксплуатации - Страница 7

- 7 -

6 Button ”Start/Pause”

This button has two functions:

Start:

Press the button in order to start the required

programme. The corresponding indicator lamp 

is lit. The indicator lamp for ”Locked” in the pro-
gramme progress display is lit and the door is 
locked.

Pause:

To interrupt a programme which is running, press
the button. The corresponding indicator lamp 
starts to flash. To continue the programme, press
the button again.

7 Programme progress display

When you select a wash programme, the light corres-
ponding to the various phases of the programme goes on.
When the programme has started, the display will allways
show which section of the choosen programme the
machine is performing, or if is finished. 

= pre wash/main wash

= rinses

= spin

= end

= locked

:

the light comes on when the machine is performing

the washing phase (main wash). If you have choosen
the ”Pre wash” option by pressing that button, the light
will be on during the pre wash phase too.

:

end of programme.

:

the light indicates if the door can be opened:

●

the light is lit: the door can not be opened

●

the light is out: the door can be opened

●

the light flashes: the door can soon be opened

8 Spin speed or function

With this selector you can reduce the final spin speed or
select the       ”No spin” option. The speeds are applied
for the ”white-” and ”coloured” programmes.

●

The position 800 is equivalent to 800 rpm/min for the 

synthetic and wool programmes and 700 rpm/min for 
the delicate wash programme.

●

The position 400 is equivalent to 400 rpm/min for all 

the wash programmes.

”No spin”, by selecting this option all the spinning 
phases are excluded. To be used for extremely 
delicate material. The machine will add 3 extra 
rinses to the cotton programmes and 1 extra rinse
to the synthetic programmes.

”Rinse Hold”, when selecting this position the 
water of the last rinse is not drained to prevent  
the laundry from creasing. The lights ”End” and 
”Locked” on the programme progress display are 
lit when the programme is finished and indicating 
that the water must be drained before the door 
can be opened. 

To drain the water:

1. Turn the programme selector to the ”Reset” 

position.    

2. Choose the programme ”Drain”       or ”Spin”    .

You can reduce the spin speed by turning the 
selector. 

3. Press in the Start/Pause button.

9 Programme selector

The selector is divided into 5 sections:

●

Cotton

●

Synthetic 

●

Delicate

●

Wool 

●

Special programmes

Turn the programme selector clockwise or anticlockwise
to select the programme and temperature according to
the care label, or one of the special programmes. 

= cold, the water is not heated 

= resets, cancels the programme, switches the 

machine off.

If you turn the programme selector to an other
programme when the machine is working, the
lights in the programme progress display starts
to flash. The machine will not perform the new
selected programme. 

When the programme is finished, the pro-
gramme selector must be turned back to the
reset position.