Whirlpool AWG 2311 - Инструкция по эксплуатации - Страница 35

FAILURE

PROBABLE CAUSE

METHODS OF

ELIMINATION

Machine load exceeds
maximum capacity.

Load clothes into your
machine so as to avoid
exceeding its
maximum capacity.

Your water may be
hard.

Regulate the amount of
detergent used
according to the
detergent producer's
guidelines.

Washing quality is
poor.

Distribution of the
clothes in your
machine is not evenly-
balanced.

Spread the clothes
inside the machine in
an orderly and evenly-
balanced manner .

The water is drained
from the machine as
soon as it is filled.

The end of the water
drain hose is
positioned too low in
relation to the machine.

Place the water  drain
hose at an appropriate
height.(**)

No water is seen in the
drum during washing.

No failure. The water is
in the lower part of the
drum.

-

There is detergent
residue on the clothes.

Undissolved fragments
of certain detergents
may stick to your
clothes as white stains.

By calibrating your
machine for “Rinsing”
programme, run an
additional rinse or
eliminate stains after
drying with the help of
a brush.

There are grey stains
on the clothes.

These stains may be
caused by oil, cream or
ointment.

Use the maximum
detergent amount
recommended by the
detergent producer
during the next
washing operation.

(**)   See the section concerning installation of your machine.

 33