Стиральная машина Indesit WIE 107 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
7
GB
Function
Effect
C omments
Enabled with
programmes:
St ain
removal
Bleach ing cycle
des ign ed to
remove t he
tou gh est stain s.
Please remember t o pou r t h e bleach in t o ex t ra compartmen t 4
(s e
e page 8)
.
Th is fu n ction is incompatible with the EASY I RON fu n ction .
2, 3, 4,
Rinse cycle.
Ex t ra R in s e
I n creases th e
efficien cy of th e
rin se.
Recommen ded when th e appliance h as a fu ll load or with large
qu an tities of detergent.
1, 2 , 3, 4, 7 ,
8, 9, 11, 12,
Rinse cycle.
Eas y iron
Th is option
redu ces th e
amou n t of
creasin g on
fabrics, makin g
th em easier to
iron .
W h en t h is fu nct ion is s et , programmes 4, 5, 6 will end, with t h e
lau n dry left to so ak (Anti-crease), an d th e relative bu tton flash es:
- to con clu de the cycle, press th e START/RESET bu tton or th e
EASY I RON bu tton ;
- to ru n the drain in g cycle alon e, set th e kn ob to th e relative
s ymbol an d pres s t h e STAR T/R ESET bu t t o n.
Th is fu n ction is incompatible with the STAI N REMOVAL fun ct io n.
3, 4, 5, 6, 7, 8,
9, Rinse
cycle.
Service
Tr
oubleshooting
Precautions
Care
Programmes
Detergents
Installation
Description
Personalisations
Setting the spin cycle
If, when the appliance is switched on, the KNOB is positioned on
a programme with a spin cycle, a fixed
appears. Press button
and the maximum spin speed allowed for the programme set
will be displayed, and the
icon flashes. Press it again and the
values lower until they reach OFF, which indicates that the spin
cycle has been excluded (press it again to go back to the
maximum value); stop on the desired speed, after approximately
2 seconds the setting is accepted: the symbol
remains fixed.
The spin cycle setting is enabled with all the programmes except
for 6 and the Draining cycle.
Setting the Delay Timer
Press the button
and you will see the word OFF on the
display, while the relative symbol flashes.
Press the button again and "1h" appears, that is, a delay of one
hour (this can reach up to 24h); stop on the "desired" delay; after
approximately 2 seconds the setting is accepted, following which,
the time for the set programme appears on the display and the
symbol remains on.
If you now press the START/RESET button, the set "delay"
appears; this decreases every hour until the start of the cycle. In
this phase, the "delay" can only be modified by decreasing it.
The Delay Timer regulation is enabled with all programmes.
Setting the temperature
If, when the appliance is switched on, the KNOB is positioned on a programme for which the temperature needs
to be regulated, a fixed appears. Press button and the maximum temperature allowed for the programme set
will be displayed and the icon flashes. Press it again and the temperature lowers until it reaches OFF, which
indicates a cold wash cycle (press it again to go back to the maximum value); stop on the desired value, after
approximately 2 seconds the setting is accepted: the symbol remains fixed.
The temperature adjustment is enabled with all wash programmes.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
If you set a function that is incompatible with another function you selected previously, only the last one selected
will be enabled.
FUNCTION buttons