Indesit PWSE 6108S - Инструкция по эксплуатации - Страница 6

6

GB

Running a wash cycle

1. 

SWITCH THE MACHINE ON.

 Press the   button; 

the START/PAUSE indicator light will flash slowly in a 
blue colour.

2. 

LOAD THE LAUNDRY.

  Open the porthole door. 

Load the laundry, making sure you do not exceed 
the maximum load value indicated in the table of 
programmes and wash cycles on the following page.

3. 

MEASURE OUT THE DETERGENT.

 Pull out the 

detergent dispenser drawer and pour the detergent into 
the relevant compartments as described in “

Detergents 

and laundry

”.

4. 

CLOSE THE DOOR.

5. 

SELECT THE WASH CYCLE.

 Use the WASH CYCLE 

SELECTOR knob to select the desired wash cycle. A 
temperature and spin speed is set for each wash cycle; 
these values may be adjusted. The duration of the cycle 
will appear on the display.

6. 

CUSTOMISE THE WASH CYCLE. 

Use the relevant 

buttons:

Modify the temperature and/or spin 

speed.

 The machine automatically displays the 

maximum temperature and spin speed values set for 
the selected cycle, or the most recently-used settings 
if they are compatible with the selected cycle. The 
temperature can be decreased by pressing the 

button, until the cold wash “

OFF

” setting is reached. 

The spin speed may be progressively reduced by 
pressing the 

 button, until it is completely excluded 

(the “

OFF

” setting). If these buttons are pressed again, 

the maximum values are restored.

 Setting a delayed start.

To set a delayed start for the selected cycle, press the 
corresponding button repeatedly until the required delay 
period has been reached. When this option has been 
activated, the   symbol lights up on the display. To 
remove the delayed start setting, press the button until 
the text “

OFF

” appears on the display.

Modify the cycle settings.

•  Press the button to enable the option; the indicator 

light corresponding to the button will switch on.

•  Press the button again to disable the option; the 

indicator light will switch off.

!

 If the selected option is not compatible with the set 

wash cycle, the indicator light will flash and the option 
will not be activated.

!

If the selected option is not compatible with 

a previously selected one, the indicator light 
corresponding to the first function selected will flash and 
only the second option will be activated; the indicator 
light for the option which has been activated will be 
illuminated.

Note

: if the SMART option has been selected, none of 

the incompatible options may be activated.

!

The options may affect the recommended load value 

and/or the duration of the cycle.

7. 

START THE WASH CYCLE.

 Press the START/

PAUSE button. The corresponding indicator light will 
turn blue, remaining lit in a fixed manner, and the door 
will be locked (the DOOR LOCKED   symbol will be lit). 
To change a wash cycle while it is in progress, 

pause 

the washing machine

 using the START/PAUSE button 

(the START/PAUSE indicator light will flash slowly in an 
amber colour); then select the desired cycle and press 
the START/PAUSE button again.
To open the door while a cycle is in progress, press the 
START/PAUSE button; if the DOOR LOCKED   symbol 
is switched off the door may be opened. Press the 
START/PAUSE button again to restart the wash cycle 
from the point at which it was interrupted.

8. 

THE END OF THE WASH CYCLE.

 This will be 

indicated by the text “

END

” on the display; when the 

DOOR LOCKED   symbol switches off the door may be 
opened. Open the door, unload the laundry and switch 
off the machine.

!

 If you wish to cancel a cycle which has already begun, 

press and hold the   button. The cycle will be stopped 
and the machine will switch off.

Load balancing system

Before every spin cycle, to avoid excessive vibrations 
before every spin and to distribute the load in a uniform 
manner, the drum rotates continuously at a speed which 
is slightly greater than the washing rotation speed. If, 
after several attempts, the load is not balanced correctly, 
the machine spins at a reduced spin speed. If the load is 
excessively unbalanced, the washing machine performs 
the distribution process instead of spinning. To encourage 
improved load distribution and balance, we recommend 
small and large garments are mixed in the load.