Electrolux EWF 146410 W - Инструкция по эксплуатации - Страница 9

If required, pour fabric softener into the com-
partment marked 

 (the amount used

must not exceed the «MAX» mark in the
drawer). Close the drawer gently.

Select the required programme by
turning the programme selector dial (1)

Turn the programme selector dial to the re-
quired programme. The washing machine
will propose a temperature and automatical-
ly select the maximum spin value provided
for the programme you have chosen. You
can change these values by operating the
corresponding buttons. The 

green

 pilot

light of the button 

8

 starts to flash.

The selector dial can be turned either clock-
wise or counterclockwise. Turn to position

 to reset programme/Switching the ma-

chine off.

At the end of the programme the selec-
tor dial must be turned to position 

 ,

to switch the machine off.

Caution!

 If you turn the programme

selector dial to another programme
when the machine is working, the 

red

pilot light of button 

8

 will blink 3 times

and the message 

Err

 is displayed to

indicate a wrong selection. The
machine will not perform the new
selected programme.

Programme Option buttons

Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before pressing the button 

8

 .

Select the temperature by pressing
button 2

By selecting a programme, the appliance
proposes automatically a default tempera-
ture.
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a different temper-
ature.

Reduce the spin speed by pressing
button 3

By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 

3

 repeatedly to change the

spin speed, if you want your laundry to be
spun at a different speed. The relevant light
illuminates.

Select the available option by pressing
buttons 3, 4 and 5

Depending on the selected programme, dif-
ferent functions can be combined before
pressing the button 

8

 . By selecting an op-

tion the relevant pilot light illuminates.
If an incorrect option is selected, the integra-
ted 

red

 pilot light of the button 

8

 flashes 3

times and the 

Err

 message appears on the

display for few seconds.

For compatibility among the washing
programmes and the options see chap-
ter «Washing Programmes».

Select the Delay Start by pressing
button 6

Before you start the programme, if you wish
to delay the start, press the button 

6

 repeat-

edly, to select the desired delay. The rele-
vant pilot light goes on.
The selected delay time value (up to 20
hours) will appear on the display a few sec-
onds, then the duration of the programme
will appear again.
You must select this option after you have
set the programme and before you press
button 

8

 .

You can cancel or modify the delay time at
any moment, before you press button 

8

 .

Selecting the delayed start:
1. Select the programme and the required

options.

electrolux 

 9