Electrolux EWF 126410 W - Инструкция по эксплуатации - Страница 10

2. Select the delay start by pressing the but-

ton 

6

 .

3. Press button 

8

 :

– the machine starts its hourly count-

down.

– The programme will start after the se-

lected delay has expired.

Cancelling the delayed start after having
pressed button 

8

 :

1. Set the washing machine to PAUSE by

pressing button 

8

 .

2. Press button 

6

 once until the symbol 

0’

is displayed

3. Press button 

8

 again to start the pro-

gramme.

Important!

 The selected delay can be

changed only after selecting the washing
programme again.
The Delay Start 

can not

 be selected with

DRAIN

 programme.

Start the programme by pressing
button 8

To start the selected programme, press the
button 

8

 , the green pilot light of the button

8

 stops blinking.

To interrupt a programme which is running,
press the button 

8

 : the green pilot light

starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 

8

again

 . If you have chosen a delayed start,

the machine will begin the countdown. If an
incorrect option is selected, the 

red

 pilot

light of the button 

8

 blinks for 3 times the

message 

Err

 is displayed for a few seconds.

Select the Time Manager option by
pressing buttons 10

By pressing these buttons repeatedly, the
duration of the washing cycle can be in-
creased or decreased. The soil level icon
will appear on the display to indicate the
chosen degree of soil. This option is availa-
ble only with 

Cotton

 , 

Synthetic

 and 

 Deli-

cate

 programmes.

Soil Level

Icon

Type of fabric

Intensive

For heavy soiled
items

Normal

For normal soiled
items

Daily

For daily soiled items

Soil Level

Icon

Type of fabric

Light

For slightly soiled
items

Quick

For very slightly
soiled items

Super Quick 

1)

For items used or
worn for a short time

Refresh 

1)

2)

For refreshing items
only

Super Re-
fresh

1)

2)

For refreshing a very
few items only

1) We recommend you to reduce the load sizes (see

Washing programmes table).

2) When you select this option the relevant icon appears

just for a while and then it disappears immediately.

Altering an option or a running
programme

It is possible to change some options be-
fore the programme carries them out .
Before you make any change, you must
PAUSE the appliance by pressing the but-
ton 

8

 (if you wish to change the Time Man-

ager option, you must cancel the running
programme and make your selection again).
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to 

 and then to the new pro-

gramme position. Start the new programme
by pressing the button 

8

 again. The wash-

ing water in the tub will be not emptied out.

Interrupting a programme

Press the button 

8

 to interrupt a pro-

gramme which is running, the correspond-
ing green pilot light starts blinking.
Press the button again to 

restart

 the pro-

gramme.

Cancelling a programme

Turn the selector dial to 

 to cancel a pro-

gramme which is running.
You can select now a new programme.

Opening the door

After the programme has started (or during
the delay time) the door is locked, if you
need to open it, set first the machine to
PAUSE by pressing the button 

8

 .

After a few minutes the pilot light 

9

 goes

out and it is possible to open the door.
If this pilot light remains lit, this means that
the machine is already heating or that the

10 

 electrolux