Ardo WDN 1264 SW - Инструкция по эксплуатации - Страница 8

8

SM2719

CONTROL PANEL

GB

ADJUSTABLE SPIN:

 Button C can be pressed to change the spin speed in line with 

the wash programme selected and the type of fabrics. The selected spin speed will 
be indicated by the lit LED. To disable the end of cycle spin, select icon “        ”
N.B.: The maximum spin speed varies according to the model. The spin speed 
selected by the programme is that recommended.

DRY:

 When the dry option is selected, the washing will be dried by a current of hot 

air at the end of the wash phase. The duration of the drying phase is selected by 
repeatedly pressing button 

G

. The time depends on the amount of washing loaded, 

the type of fabric and the degree of dampness to retain.
When this option is enabled, the no-spin function is disabled. At the same time, the 
detergent dispenser must not be placed in the drum as it could melt during the drying 
phase and damage both the washing and the washing machine.

PRE-WASH: 

To carry out a prewash, press button 

D

 and add detergent to the ap-

propriate compartment 

1

. The washing machine will carry out a prewash at 40°C max. 

A Prewash is recommended for items soiled with dust, soil, sand or with particularly 
resistant stains. See the Programme Table for further information.

DELAYED START / PROGRAMME PHASE INDICATOR LEDS: 

Before starting 

the programme, the progressive lighting up of the leds indicates the selected delay 

time.
During operation, the LEDS will indicate the programme phase the washing machine 

is currently effecting.

TURBO: 

To reduce the wash time, press the Turbo button 

E

. The operating parameters 

are automatically regulated to ensure an effective wash and to save time. See the 
Programme Table for further information.

SKIN CARE:

 Pressing the button

 F

 activates the skin care function, which carries 

out an extra rinsing. The option is recommended for skins particularly sensitive to 
the enzymes contained in detergents.

DELAYED START: 

This function allows the start of the wash cycle to be delayed by 

up to 8 hours. Press button B repeatedly until the required delay time is indicated by 
the appropriate LED. LED T will fl ash until the wash cycle starts.

START: 

During the phase for selecting programs and washing options, the start LED 

stays off. To confi rm the selections and start the wash cycle, press “Start” button 

H

. 

The LED will light up.