Gorenje WTD 63131 - Инструкция по эксплуатации - Страница 13

25

EN

24

EN

4 / PROGRAMMING YOUR APPLIANCE

4 / PROGRAMMING YOUR APPLIANCE

• OTHER FUNCTIONS

• DETAILS OF OPTIONS (continued)

•Automatic cooldown

If you select the 

“Colors” 

option and a

“Washing and subsequend drying”

cycle your

laundry is cooled for 2 hours at the end of the
drying cycle. This prevents formation of wrin-
kles, which are particularly visible on dark-
coloured laundry.
The 

“Drying”

light remains on during the entire

cooldown period.
To access your laundry during this period,
cancel the automatic cooldown by pressing
the “Start/

Pause” 

button 

. Then turn

the 

program selector

back to 

“0”

E

E

•

- Drying

This program lets you run a drying cycle
immediately after your wash cycle. This option
always uses 

HIGH drying temperature

. The

program will stop automatically when the
appliance estimates the laundry to be dry.
Therefore you do not need to program the
drying duration.

• AUTOMATIC SAFETY SYSTEMS

•Lid opening safety system :

As soon as washing commences, the lid on your
machine is locked. 

When the cycle is finished or when the machine
has stopped with the drum full of water, the lid
unlocks.

If you have programmed a "Delayed start", the lid
is not locked until the waiting period is over and
the cycle starts.

If you wish to open the lid during the cycle, press
“Start/

Pause” 

button 

briefly and wait

1-2 minutes for the safety system to unlock the
lid.

Important :

Depending on the moment during the

cycle when you wish to open the lid, this
period may be longer since a cooling period
is required.
Indeed, during the cycle, to prevent the lid
from unlocking, the temperature inside the
machine must not exceed a certain thres-
hold, to prevent serious burns.

E

E

•OTHER FUNCTIONS (continued)

•Anti-foam safety

Your washing machine can detect excessive
production of foam during the spin.
In this case, the spin stops and the machine is
emptied.
The cycle then resumes, adjusting the spin
speeds and possibly adding an extra rinse.

•Water safety

During operation, the water level is constantly
checked to prevent any overflow.

•Spin safety

Your washing machine has a safety feature
that can limit spinning if it detects that the
load is poorly distributed.
In this case, your laundry may be insufficiently
spun. Spread out your laundry evenly in the
drum and program a new spin.

•Remaining Time Display

— During programming, the display 

tells

you the estimated duration of the program for
a standard load (*).
(*) The time indicated by the machine at the
start of the program may vary during the
cycle:
— After estimating the load contained in the
drum.
— If you change the washing temperature
(even during the spin), if you add or remove
options, the time will be recalculated and
updated on the display.

3

3

—  During the cycle, the display 

shows

you the estimated time remaining until the end
of the cycle at all times.

— If power is disconnected during the wash
phase, when power returns the time displayed
may be less than the actual remaining time.
This time will be adjusted at the start of the
rinse phase.

3

3

•Draining  

This function is for very delicate laundry and lets you eliminate spinning and go directly to the emp-
tying phase.

•Full tank stop  

This function is used for textiles that you do not wish to spin or if you envisage being absent for a
long time after the washing is finished.
When this function is selected, the cycle interrupts before the final spin, enabling your washing to
soak in the water to avoid creasing.

Then:

— to drain and spin :

Select the 

“Spin”

program using the 

program

selector

, then, using the 

Spin

button

A

A

— to drain only :

Select the 

“Spin” 

program, then using the

Spin

button

,  change  the  display  to 

B

B

NB :

When the machine is stopped with the tub full of water, the 

display

stops counting down the remaining time and the 

“Rinse” 

cycle light

flashes.

3

3

•Delayed start

You can delay the start of your program by 1 to 24 hours to take advantage of preferred energy
rates or to end the cycle at the time desired.
To do this, select the required duration by pressing successively on the 

"Delayed Start" 

buttons

until you reach the duration required.

D

D

down the time remaining before the cycle will start (the final hour is counted in minutes 

).

, set a spin speed suited to the type of

laundry. The program will finish automatically.

B

B

(drain function).

NB:

After a few seconds, the digit  

on the 

display

will flash on and off. The display will count 

3

3