Asko HDB1153T - Инструкция по эксплуатации - Страница 8

8

ADJUSTING AND FIXING THE 

IRONING BOARD

 (BEFORE FIRST USE)

1

Press on the hidden helper door to open it.

Hold the ironing board handle and pull it out towards you as 
far as it will go.

2

Unfold (open) the ironing board in the direction indicated 
in the 

fi

 gure.

3

Check for stability before using for the 

fi

 rst time. When 

the ironing board is in the locked position, it is very 

important that its back part is pressed tightly against the 
dryer.

If the ironing board does not 

fi

 t tightly, it can be adjusted as 

necessary. To do this, fold (close) the ironing board and follow 
steps 4, 5 and 6.

4

Use a screwdriver to carefully undo the screws on the 
guides on both sides (as shown in the 

fi

 gure) and pull out 

the ironing board under a right angle (perpendicularly).

5

Detach the ironing board from the guides in the 
perpendicular direction, and set the length of the plastic 

plug extension on both sides.  

6

Then, replace and tighten the screws removed in step 4.

Replace the ironing board (under a right angle).

CLICK

7

When replacing the board (under a right angle), it has to 
audibly "CLICK" into place. Then, push the ironing board 

towards the inside of the hidden helper.

Close the hidden helper door.

We reserve the right to modi

fi

 cations.