VITEK VT-1634 GY - Инструкция по эксплуатации - Страница 4

4

 ENGLISH

only; usage for commercial purposes is 
prohibited.

Preparation for operation

•  Unpack the unit.
•  Before you connect the unit to the mains, 

make sure that the voltage specified on 
the unit corresponds to the voltage in 
your home socket.

• Carefully wash all the removable parts, 

which will contact products, and dry 
them.

Note: Be carefully while holding the fil-
ter-grater; its surface is very sharp.

• Wash vegetables/fruit and cut them into 

pieces, which will easily pass into the cov-
er throat of the unit.

• While extracting juice from stone fruits 

(for instance cherry, peach etc.) remove 
pits from the fruit.

Making juice

•  Put the unit on the stable dry and flat sur-

face.

• Before assembling, make sure that the 

unit is switched off and unplugged.

• Set the juice tank (4) on the motor unit 

(7). 

•  Set the filter-grater (3) into the juice tank 

(4). 

Note

: Do not use the filter-grater if there 

are any mechanical damages in it.

•  Set the container for pressed skins. 
  Firstly connect the upper part, then con-

nect the lower part.

•  Set the cover (2) on the juice tank and fix 

it using the handle-clamp (6) 

•  Insert the pusher (1) into the throat of the 

cover.

•  Put a corresponding tank for juice under 

the pouring spout (5).

•  Insert the plug into the socket.

•  Switch on the juicer, by setting the switch 

(8) to the “I” (low speed) or the “II” (high 
speed) position.

Note:
- “low speed” is used to extract juice 

from soft vegetables/fruit (tomatoes, 
pears, strawberry, oranges, plums, 
grapes, pumpkin, onion, cucumbers 
etc.).

- “high speed” is used to extract juice 

from hard vegetables/fruit (artichoke, 
carrot, apples, pepper, beetroot, po-
tatoes, pineapples, vegetable mar-
rows, celery, spinage, dill, kurrat 
etc.).

• The unit will switch on only if all the re-

movable parts are installed properly and 
the cover (2) is fixed by the handle-clamp 
(6).

• Put the products only while the motor is 

operating.

• Gradually put preliminary cut pieces of 

the products into the throat (2) of the cov-
er and slightly press them with the pusher 
(1). Do not press strongly the pusher; it 
can lead to worse quality of the juice or 
to a stop of the filter-grater rotation (3). 
The longer vegetables and fruit are being 
processed, the more juice you will get.

• Do not put your fingers or other objects 

into the throat (2) of the cover.

•  Periodically check the condition of the fil-

ter-grater (3) concerning blockage of the 
filter, if necessary wash the filter-grater 
(3).

•  Check filling of the container for pressed 

skin (9), if it is full, switch off the unit, take 
the plug out of the socket, and remove 
the pressed skins from the container.

AT TENTION: Maximal running time – is 
not more than 40 seconds with not less 
than a 3-minute interval.

•  After using of the unit switch it off by set-

4

1634.indd   4

1634.indd   4

07.07.2010   12:57:57

07.07.2010   12:57:57