VITEK VT-1631 BK - Инструкция по эксплуатации - Страница 4

4

 ENGLISH

• Do not use the device, if its power cord, 

the plug or other details are damaged.

• Do not repair the device independently. 

Apply to the authorized service center if 
the power cord is damaged or if you need 
to repair the device.

•  Store the device in a dry, cool place inac-

cessible for children.

•  The device is intended only for household 

usage, commercial usage of the juicer is 
forbidden.

Preparation for work

•  Take the device from packing.
• Before you connect the device to the 

electricity network, make sure that the 
operating voltage of the device corre-
sponds to the voltage of the electricity 
network.

• Carefully wash out all removable details 

which will contact products, and dry 
them.

 Note

: Be cautious holding the filter-grat-

er, the grater has a sharp surface.

•  Wash up vegetables/fruit and cut in slices 

which would easily pass into the lid throat 
of a juicer.

• While extracting juice from stone fruits 

(for instance cherry, peach etc.) remove 
stones from the fruit.

Making juice

•  Put the device on stable dry and flat sur-

face.

• Before assembling, make sure that the 

device is switched off and unplugged.

• Establish the juice tank (5) on the motor 

block (7).

• Establish the filter-grater (4) in the juice 

tank (5).

 Note

: do not use the filter-grater at de-

tection of mechanical damages.

•  Establish a lid (3) on the juice tank and fix 

by clamps (6).

• Establish the container for pressed skin 

(8).

•  Insert the plug into the socket.

• Switch on the juicer, having established 

the switch (9) in position «1» (low speed) 
or in position «2» (high speed).

Note

:

-  «Low speed» - for extracting juice from 

soft vegetables/fruit (tomatoes, pears, 
strawberry, oranges, plums, grapes, 
pumpkin, onions, cucumbers, etc.).

-  «High speed» - for extracting juice from 

firm vegetables/fruit (artichokes, carrots, 
apples, pepper, beets, potatoes, pineap-
ples, vegetable marrows, celery, spinach, 
fennel, leek, etc.).

Attention!

 Handling the products creating 

additional loading on the motor (viscous 
and/or firm products) it is recommended 
to use the device on the raised speed «2» 
in order to avoid a stop of the motor in the 
course of work and its subsequent exit out 
of operation.

• The juicer will start working only if all re-

movable parts are established correctly 
and the lid (3) is fixed by clamps (6).

• Load products only when the engine is 

working.

•  Gradually put preliminary cut pieces of the 

products into the lid throat (2) and slightly 
press them with the pusher (1). Do not 
press strongly the pusher; it can lead to 
worse quality of the juice or to  stop of the 
filter-grater rotation (4). Longer vegeta-
bles and fruit being processed, the more 
juice you will get.

• It is forbidden to immerse fingers and 

other subjects in the lid throat (2).

•  Periodically check the condition of the fil-

ter-grater (4) concerning blockage of the 
filter, if necessary wash the filter-grater 
(4).

•  Check filling of the container for pressed 

skin (8), if it is full, switch off the unit, take 
the plug out of the socket, and remove 
the pressed skins from the container.

4

1631.indd   4

1631.indd   4

22.12.2010   15:10:55

22.12.2010   15:10:55