VITEK VT-1600 - Инструкция по эксплуатации - Страница 5

Соковыжималки VITEK VT-1600 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 32
Загружаем инструкцию
background image

5

ENGLISH

 •

Feed  fruit/vegetable  pieces  into  the  lid  (3) 
feeding  chute  (2)  only  when  the  grating  fil-
ter (4) is rotating.

 •

Gradually  put  vegetables  or  fruits  cut 
beforehand into the lid (3) feeding chute  (2) 
and  push  them  gently  with  the  pusher  (1). 
Do  not  press  on  the  pusher  (1)  too  hard 
as  it  can  lead  to  decrease  of  juice  amount 
as  well  as  stop  the  grating  filter  (4)  rota-
tion. The slower is the fruit and vegetables 
processing,  the  higher  is  the  juice  extrac-
tion rate.

 •

Do not put your fingers or any other foreign 
objects into the lid (3) feeding chute (2).

 •

During operation, check the grating filter (4) 
periodically for obstruction of the mesh with 
pulp, if necessary wash the grating filter (4); 
before removing the grating filter (4), switch 
the juice extractor off and unplug it.

 •

Control  the  pulp  compartment  (10)  filling, 
if  the  compartment  (10)  is  filled  up,  switch 
the juice extractor off, unplug it and remove 
the pulp.

AT TENTION!
The  maximal  allowable  continuous  opera-
tion time for the juice extractor is 1 minute 
with subsequent break of at least 1 minute. 
After 3 operation cycles make a break of at 
least 15 minutes.
After processing of 500 g hard and fibrous 
fruits  and  vegetables  (citrus  plants,  pine-
apples,  apples,  carrots  etc.)  disassem-
ble  and  clean  the  unit.  Non-compliance 
with  the  requirement  can  cause  the  grat-
ing mesh blockage and will complicate the 
unit cleaning.

 •

After  unit  operation,  switch  it  off  by  set-
ting  the  switch  (9)  to  the  position  «0»,  and 
unplug it.

OVERHEATING PROTECTION
The  overheating  protection  system  will  switch 
the power supply off if the electric motor oper-
ating  temperature  is  too  high.  If  during  the 
operation  the  juice  extractor  switches  off,  set 
the  operation  mode  switch  (9)  to  the  position 
«0» and unplug the unit.
Let the juice extractor cool down for 30-40 min-
utes and switch it on again. 
Do not exceed specified operation time and do 
not  overload  the  juice  extractor  with  products 
during its operation.

CLEANING AND CARE
After  the  end  of  operation  or  before  cleaning 
always switch the unit off and unplug it.
Disassemble  and  clean  the  juice  extractor 
after  every  usage  and  follow  the  recom-
mendations below.

 •

Remove the pusher (1) from the lid (3) feed-
ing chute (2).

 •

Lower the lock (7) and remove the lid (3).

 •

For  easy  removal  of  the  grating  filter  (4) 
remove  the  grating  filter  with  the  juice  col-
lector (5) holding the juice collector (5) and 
pulling it upwards.

 •

Set the spout (6) to the middle position and 
remove it.

 •

It  is  recommended  to  wash  all  removable 
parts in warm water with a neutral detergent 
right after the unit operation.

 •

It is more convenient to wash the grating fil-
ter  (4)  openings  from  the  outside  using  an 
appropriate brush.

 •

Be  cautious  when  washing  the  grating  fil-
ter  (4),  the  disc  grating  surface  is  very 
sharp.

 •

Do  not  wash  the  grating  filter  (4)  and  other 
removable parts in a dishwasher.

 •

Clean  the  motor  unit  (8)  with  a  slightly 
damp  cloth  and  then  wipe  it  dry.  Do  not 
immerse the motor unit (8) into water or any 
other liquids; do not wash the motor unit (8) 
under water jet.

 •

Do  not  use  coarse  sponges,  abrasives  and 
solvents to clean the unit.

 •

Some products, such as carrots or beets, 
can  dye  the  juice  extractor’s  removable 
parts,  you  can  use  a  dry  cloth  dampened 
in  vegetable  oil  for  removing  stains;  
after  cleaning  of  parts  wash  them  with 
warm  water  and  a  neutral  detergent,  then 
dry.

 •

Assemble the juice extractor.

TIPS

 •

Use only fresh fruits and vegetables, as they 
contain more juice.

 •

For  juice  extracting  you  can  use  different 
vegetables  (carrots,  cucumbers,  beets, 
celery  stems,  spinach,  tomatoes)  or  fruits 
(apples, grapes, pineapples).

 •

It  is  recommended  to  wash  berries  right 
before  juice  extracting,  as  they  lose  fresh-
ness quickly.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-1600?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"