Соковыжималки Scarlett IS-JE52S02 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
5
GB
INSTRUCTION MANUAL
•
Do not overload appliance with products.
•
If the product has been exposed to
temperatures below 0ºC for some time it
should be kept at room temperature for at
least 2 hours before turning it on.
•
The manufacturer reserves the right to
introduce minor changes into the product
design without prior notice, unless such
changes influence significantly the product
safety, performance, and functions.
2. BEFORE USING FOR THE FIRST TIME
•
After unpacking the unit and before any use,
make sure the mechanical parts of the unit
and all attachments are not damaged.
•
Wash and dry all parts of the appliance,
which will come into contact with products.
To clean the outside of the body use a damp
sponge.
•
Practice assembling and dismantling the unit
a few times before making juice.
3. HOW TO ASSEMBLE
•
DISMANTLING:
•
Unplug the appliance from the power supply.
•
Open the locks.
•
Remove the transparent lid, pull the grating
filter upwards, then take off separating unit.
While doing this, hold it by the beak from
below and by the underside of the top of the
unit on the other side.
•
ASSEMBLING:
•
Place the separating unit on the motor unit,
push with both hands on the separating unit
until it clicks into place.
•
Insert the grating filter; turn it clockwise to fit
securely.
•
Mount the transparent lid and fasten the locks.
•
Place the pulp container under the cover, and
the glass – under the beak for juice.
•
Plug the appliance to the power supply.
4. OPERATING INSTRUCTIONS
•
Before starting make sure that the juicer
is switched off and transparent lid fixed
properly.
•
Wash fruits and vegetables thoroughly. Cut
fruits into small pieces so as to be fitted
into the feeding tube. Remove the stone
or peel from those citrus and fruit: prunes,
apricots, cherries or oranges, lemons,
melons, etc.
•
Connect the juice extractor to mains.
•
Press the ON/OFF button to switch the
appliance on. The juice extractor will start
operation at lowest speed.
•
Using "+" and "-" buttons, set the required
speed (1 to 5), depending on the type of
the product processed.
•
Softer products, such as grape, peach,
melon, and berries, should be processed
at lower speeds.
•
Harder products, such as carrots,
pumpkin, apples, and pears, should be
processed at higher speeds.
•
Feed the pre-prepared fruits and
vegetables into the juice extractor and
press down gently with the pusher. NEVER
USE FINGERS AS PUSHER.
