Соковыжималки Scarlett IS-572 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
5
GB
INSTRUCTION MANUAL
room temperature for at least 2 hours before
turning it on.
•
The manufacturer reserves the right to introduce
minor changes into the product design without
prior notice, unless such changes influence
significantly the product safety, performance,
and functions.
2. BEFORE USING FOR THE FIRST TIME
•
After unpacking the unit and before any use,
make sure the mechanical parts of the unit and all
attachments are not damaged.
•
Wash and dry all parts of the appliance, which will
come into contact with products. To clean the
outside of the body use a damp sponge.
•
Practice assembling and dismantling the unit a few
times before making juice.
3. HOW TO ASSEMBLE
•
DISMANTLING:
•
Unplug the appliance from the power supply.
•
Open the locks.
•
Remove the transparent lid, pull the grating filter
upwards, then take off separating unit. While doing
this, hold it by the beak from below and by the
underside of the top of the unit on the other side.
•
ASSEMBLING:
•
Place the separating unit on the motor unit, push
with both hands on the separating unit until it clicks
into place.
•
Insert the grating filter; turn it clockwise to fit
securely.
•
Mount the transparent lid and fasten the locks.
•
Place the pulp container under the cover, and the
glass – under the beak for juice.
•
Plug the appliance to the power supply.
4. OPERATING INSTRUCTIONS
•
Before starting make sure that the juicer is
switched off and transparent lid fixed properly.
•
Wash fruits and vegetables thoroughly. Cut
fruits into small pieces so as to be fitted into the
feeding tube. Remove the stone or peel from
those citrus and fruit: prunes, apricots, cherries
or oranges, lemons, melons, etc.
•
Connect the juice extractor to mains.
•
Before initial operation switch the juice extractor
on with no food inside and operate for five
seconds.
•
Press the "SLOW" button to process soft fruits
and vegetables (melon, cucumber, tomato,
pineapple); press the "HIGH" button to process
hard food (carrot, apple).
•
During processing, the speed setting "SLOW" or
"HIGH", will be displayed, together with the time
of processing.
•
Feed the pre-prepared fruits and vegetables into
the juice extractor and press down gently with
the pusher. NEVER USE FINGERS AS PUSHER.
•
Press the "POWER" to stop the operation.
•
The motor must always be running after fruit or
vegetables were fed into the appliance.
•
When pulp container or juice jug is full, switch
off the power and empty containers before
continuing the process.
5. CLEANING
•
Remove and wash all removable parts in warm
soapy water. Rinse filter assembly from under
side for easy removal of residue from strainer
holes. Do not use a dishwasher or very hot water.
•
Do not use steel woods, abrasive cleaners or
scouring pad on appliance.
