Philips HR1932 - Инструкция по эксплуатации - Страница 10

12

ENGLISH

Troubleshooting

This chapter summarises the most common problems you could encounter with the 
appliance. If you are unable to solve the problem with the information below, visit 

www.philips.com/support

 for a list of frequently asked questions or contact the 

Consumer Care Centre in your country. 

Problem

Solution

The appliance does not 

work.

The appliance is equipped with two safety pins. If either 

the juicing unit or the pulp container has not been 

placed on the motor unit properly, the appliance does 

not work. Check whether these parts have been 

assembled in the right way (see chapter ‘Preparing for 

use’).

The motor unit gives off 

an unpleasant smell 

the first few times the 

appliance is used.

This is not unusual. If the appliance continues to give off 

this smell after a few times, check the quantities you are 

processing and the processing time.

The juicing unit cannot 

be placed onto the 

motor unit.

Check if the spout is properly attached to the juicing 

unit. Make sure that the projections on the juicing unit 

are aligned with the recesses in the motor unit (see 

fig. 9).

The juicing unit is 

blocked.

Press the pre-clean button for a few seconds. If the 

juicing unit is still blocked, then switch off the appliance, 

remove the juicing unit and disassemble all parts. 

Remove the fruit that is blocking the juicing unit. Then 

process a smaller quantity.

The appliances stops 

working and the 

power-on light flashes.

The juicing unit is blocked. Press the pre-clean button 

for a few seconds. If the juicing unit is still blocked, then 

switch off the appliance, remove the juicing unit and 

disassemble all parts. Remove the fruit that is blocking 

the juicing unit. Then process a smaller quantity.

The power-on light 

flashes and the 

appliance cannot be 

switched on.

Check whether the pulp container is in the correct 

position and the juicing unit is assembled properly.