Moulinex Juice & Clean (ZU420E10) - Инструкция по эксплуатации - Страница 62

62

Common faults

Handling method

The machine stopped suddenly during 
operation, and alarm is sounded

Is the machine is clogged from excessive 

feeding (too many pieces or pieces too large)?   

Put the machine into “Reverse” mode and let it 
run for 5 seconds.

Has the machine entered its safety mode 

after working continuously for more than 

20 minutes? 

Solution: Allow the machine to rest for 
30 minutes, then try again. 
If you are unable to restart the machine, get in 
touch with our customer service.

The auger has been scratched

The gap between the auger and screen is very 
small; do not run the appliance when empty.

Very little juice is extracted

Water content varies between different fruits and 
vegetables.
Fruits and vegetables also produce less juice when 
they lose their freshness.

When juicing hard fruits and vegetables, check 
that the adjustment lever is in the “Open” 
position

There is a lot of water in the pulp

When juicing soft fruits and vegetables, check 
that the adjustment lever is in the “Closed” 
position.

The screen wiper basket does not 
rotate during operation

Check if the gear at the base of the juicing bowl 
has detached.

The juicing bowl shakes slightly when 
the machine is turned on

Slight shaking of the juicing bowl during 
operation is normal.

The safety lid cannot be opened after 
juicing

There could be too much residual pulp in the 

machine, or the fruits being juiced may have 

hard pits, etc.

 Turn the switch knob to the 

“Reverse” position and allow the machine to run 
in the reverse mode for a few cycles, and then 
try again.
If you are unable to resolve the problem after 
trying the above, get in touch with our customer 
service.